1. Manuals
  2. Brands
  3. Demon International Manuals
  4. Washer
  5. STORM 415V SALT WATER
  6. Operation manual

Demon International STORM 415V SALT WATER Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operations Manual
Demon Salt Water Range
We, Demon International Limited of Abbots Close, Lee Mill Industrial Estate, Ivybridge,
Devon, PL21 9GA Declare this machine must be operated in accordance with the
operation and safety instructions as supplied with this machine. This machine is
manufactured in accordance with the following standards.
HSE PVB PM - BS415 Part 1 - BS5415 Section 2.4 1986
This instruction manual is relevant only to the following machine and will not be kept
updated unless specifically requested by the customer. However any changes to the
operating procedure or changes which might affect the safety of this machine will be
notified to the registered owner of this machine only.
Machine Type
Serial Number
Voltage
Working Pressure
Date of Supply
STORM 415V SALT WATER
STORM 415V SALT WATER CABINET
HURRICANE D1 SALT WATER
Declaration of Conformity
(E.H.S.R)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STORM 415V SALT WATER and is the answer not in the manual?

Questions and answers

Related Manuals for Demon International STORM 415V SALT WATER

Summary of Contents for Demon International STORM 415V SALT WATER

  • Page 1 Declaration of Conformity (E.H.S.R) We, Demon International Limited of Abbots Close, Lee Mill Industrial Estate, Ivybridge, Devon, PL21 9GA Declare this machine must be operated in accordance with the operation and safety instructions as supplied with this machine. This machine is manufactured in accordance with the following standards.

  • Page 2: Technical Specifications

    Technical Specifications Storm 415v Salt Water & Cabinet Pump RK-SS 15-20 Pump pressure 200 bar/2900psi Flow rate 15lpm HP Nozzle 2504 Unloader VRSS Motor MTR00220 Voltage 415v Hurricane D1 Salt Water Engine Yanmar L100 Pump RK-SS 15-20 Pressure 200 bar/2900psi...

  • Page 3: Operation

    Preparation Water Supply: Ensure there is an adequate water supply either from the mains or a reservoir. Attach water supply hoses to suitable tap or immerse end of hose into reservoir. (The 110 mesh filter supplied should be used when sucking from a reservoir.) NOTE: ONLY CLEAN FILTERED WATER SHOULD BE USED.

  • Page 4: Operating Hints

    Operating Hints During very cold weather it is most important to protect the machine against freezing. DO NOT operate machine should it become frozen. Move it to a warm area and allow to thaw naturally. Check all hoses and couplings for leaks, tighten where necessary. Leaving the pressure washer on by-pass for prolonged periods without operating the lance will cause the water in the pump to heat up.
  • Page 5 Operating Instructions SAFETY A Residual Current Device (R.C.D.) Earth Leakage Trip must be used with this machine. Water at high pressure is dangerous and can cause serious injury. This machine is to be used with great caution. NEVER point the high pressure spray jet at any person, animal, glass or any other material which may shatter.

  • Page 6: Fault Finder

    Fault Finder FAULT CAUSE REMEDY Machine stops suddenly Blown fuse. Check mains power supply, re- Or will not start. place fuse. Wait until unit cools down before resetting switch. Sudden pressure loss. Water supply failed. Check water supply. Low pressure HP nozzle worn or Replace HP nozzle.
  • Page 7 Storm Salt Water General Arrangement Unloader ARVRSS 9mtr Hose HH00030MVG Pump ARRK-SS15.20 Wheel400 Valve Kit ARKIT 2514 Oil Seal Kit ARKIT 2528 Piston Kit ARKIT 2515 Seal Kit ARKIT 2516...
  • Page 8 Hurricane D1 Salt Water General Arrangement 9 mtr Hose HH00030MVG Unloader ARVRSS Pump - ARRK-SS15.20 Unloader - ARVRSS Seal Kit - ARKIT2516 Piston Kit - ARKIT 2515 Valve Kit - ARKIT2514 Oil Seal Kit - ARKIT 2528 Wheel - Wheel400 Support Rings - ARKIT1829 Pressure Gauge - DEM20620 9mtr hose - HH00030MVG...

  • Page 9: Warranty

    Demon International’s decision in warranty matters is final and binding. Demon International Ltd undertake to repair or replace, any component which may fail due to a manufacturing fault within a period of 12 months from the date of purchase, provided that any fault or damage was not sustained by;...

  • Page 10: Warranty Procedure

    Warranty Procedure End Users If your machine develops a problem: 1. Phone Demon for advice with the model and serial number to hand. 2. Describe fully the problem as best you can. 3. If the problem cannot be resolved over the phone then the machine can be booked in for repair and if the faults are covered by the warranty the repair will be carried out free of charge.
  • Page 11 I can’t get the pressure to where it used to be — where do I start?
  • Page 20 Storm Range Inlet Fittings Position Part No Description DEM10041 100 Mesh Suction Filter MTM86010 Chemical Filter MTM73001 QR Nipple Female MTM73020 QR Nipple Male HH0053 Yellow Hose DEM20500 Jubilee Clip DEM10042 Suction filter with INC (1-4-5-6) Hose and fittings DEM10115 Detergent Pipe (Chemical Pipe) 3mtr MTM73K991 Plastic washer for N0 3...

  • Page 21: Ec Declaration Of Conformity

    EC DECLARATION OF CONFORMITY Demon International Ltd Abbots Close, Lee Mill Industrial Estate, Ivybridge, Devon PL21 9GA Declare that: Equipment High Pressure Water Jet Machines Model name/number Serial number Conforms to the relevant safety and health related requirements of the appropriate EC Directives. This declaration shall cease to be valid if modifications are made to the machine without our approval.

This manual is also suitable for:

Storm 415v salt water cabinetHurricane d1 salt water

Table of Contents