Technical Specifications - Harman Kardon AVR 220 Owner's Manual

Audio/video receiver
Hide thumbs Also See for AVR 220:
Table of Contents

Advertisement

Technical Specifications

Audio Section
Stereo Mode
Continuous Average Power (FTC)
55 Watts per channel, @ < 0.07% THD, 20Hz – 20kHz,
both channels driven into 8 ohms
Five-Channel Surround Modes
Power Per Individual Channel
Front L&R channels:
45 Watts per channel
@ < 0.07% THD, 20Hz–20kHz into 8 ohms
Center channel:
45 Watts @ < 0.07% THD, 20Hz–20kHz into 8 ohms
Surround channels:
45 Watts per channel
@ < 0.07% THD, 20Hz–20kHz into 8 ohms
Input Sensitivity/Impedance
Linear (High-Level)
Signal-to-Noise Ratio (IHF-A)
Surround System Adjacent Channel Separation
Analog Source Decoding
Dolby Digital
DTS
Frequency Response
@ 1W (+0dB, –3dB)
High Instantaneous
Current Capability (HCC)
Transient Intermodulation
Distortion (TIM)
Slew Rate
50 TECHNICAL SPECIFICATIONS
FM Tuner Section
AM Tuner Section
Video Section
200mV/47k ohms
95dB
45dB
55dB
55dB
General
10Hz–100kHz
±28 Amps
Unmeasurable
40V/µsec
Depth measurement includes knobs, buttons and terminal connections.
Height measurement includes feet and chassis.
All features and specifications are subject to change without notice.
Harman Kardon is a registered trademark, and Power for the Digital Revolution is a trademark,
of Harman International Industries, Inc.
*Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic II, AC-3 and the Double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished
Works. ©1992–1999 Dolby Laboratories, Inc. All rights reserved.
DTS and DTS Surround are trademarks of Digital Theater Systems, Inc.
UltraStereo is a trademark of UltraStereo Corp.
VMAx is a registered trademark of Harman International Industries, Inc., and is an
implementation of Cooper Bauck Transaural Stereo under patent license.
Logic 7 is a registered trademark of Lexicon, Inc.
Crystal is a registered trademark of Cirrus Logic Corp.
Frequency Range
87.5–108.0MHz
Usable Sensitivity
IHF 1.3 µV/13.2dBf
Signal-to-Noise Ratio
Mono/Stereo 70dB/68dB
Distortion
Mono/Stereo 0.2%/0.3%
Stereo Separation
40dB @ 1kHz
Selectivity
±400kHz, 70dB
Image Rejection
80dB
IF Rejection
90dB
Frequency Range
520–1720kHz
Signal-to-Noise Ratio
45dB
Usable Sensitivity
Loop 500µV
Distortion
1kHz, 50% Mod 0.8%
Selectivity
±10kHz, 30dB
Television Format
NTSC
Input Level/Impedance
1Vp-p/75 ohms
Output Level/Impedance 1Vp-p/75 ohms
Video Frequency
Response
10Hz–8MHz (–3dB)
Power Requirement
AC 120V/60Hz
Power Consumption
68W idle, 540W maximum
(2 channels driven)
Dimensions (Max)
Width
17.3 inches (440mm)
Height
6.5 inches (165mm)
Depth
17.1 inches (435mm)
Weight
31 lb (14.1kg)
TM
is a trademark of Harman International Industries, Inc. (Patent No. 5,386,478).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents