Advertisement
BIDIRECTIONAL WIRELESS PRINT SHARER
Connecting the Printer Module
If you haven't already done so, read the information about configuration
software on page 3 BEFORE you connect any modules.
ALWAYS connect the power supply to the power source first; then
connect the module. Finally, connect the module to the computer or
printer.
1. Plug the power supply into a power outlet. Then plug the power supply into
the printer module.
2. Unplug the existing printer cable from the computer but leave that cable
connected to the printer.
3. Plug the free end of the printer cable (the end that used to be plugged into
the computer) into the printer module. The green light should blink once per
second. The module is now ready to transmit and receive data.
4
IMPORTANT
NOTE
Advertisement
