Page 1
Owner’s Manual. We strongly recommend that you read the Owner’s Manual for complete details on how to install, configure and operate the AVR 125, as well as for the important safety information it contains. Figure 1 – Speaker Placement The colors shown for each speaker correspond to the matching output terminal connection on the back of the AVR 125 (see page 14).
Page 2
Power for the Digital Revolution LINE IN/SUB/LFE SUBWOOFER Step 2. Connect the speakers to the receiver: red (+) on speaker to colored (+) on receiver and black (–) to black (–). (See page 14.) Step 3. Connect the Subwoofer Pre-Out jack to the Line-In jack on your subwoofer (see page 14).
Page 3
Step 6. Plug all components into AC power outlets. The outlets on the back of the AVR 125 should be used only for low-current products, such as CD or DVD players, and the total should not exceed 100 watts.
Page 4
Coax DVD PLAYER Device Connection Options : Recommended connections are shown in red, but connections may be made to best fit your system requirements. The Video 3 inputs are on the front panel of the receiver. Device Input Name Audio Input Connections...