Unit Operation; Remote Controller - LG LS120HEV1 Owner's Manual

LS090HEV1, LS120HEV1,
LS180HEV1, LS240HEV1
LS090HXV, LS120HXV
Figure 3: Single Zone Wall Mount
Systems Remote Controllers for
Mega and Mega 115V
Table 3: Remote Controller Operation
Control Panel Display Screen
N/A
*Some functions may not be available on all models.
Due to our policy of continuous product innovation, some specifications may change without notification.
©
LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.

UNIT OPERATION

Air Circulation Button*: Used to circulate the room air without cooling
or heating.
Auto Cleaning/Energy Saving Buttons*: Sets time related to special
functions such as automatic cleaning
efficient cooling mode .
On/Off Button: Turns the remote controller power on/off.
Temperature Adjustment Buttons: Press up or down "arrow" temp
buttons to adjust temperature during cooling or heating. Display screen will
show adjusted temperature.
Operation Mode Selection Button: Cycles through the operation
mode, from top left symbols:
Cooling mode:
Auto operation or auto changeover:
Dehumidifying mode:
Heating mode:
Fan Speed Button: Adjusts the indoor fan speed by pressing repeatedly.
Also allows for natural air circulation (when wavy arrow is displayed). Note
Mega 115V remote controller display will look slightly different.
Surge Button (Heating/Cooling)*: Rapid heating or cooling of indoor
temperature. Temperature heats or cools in a short period of time.
Air Flow Direction (Swing) Buttons: Adjusts the directions of air flow;
vertically or horizontally through louvers.
Room Temperature Display Button: Displays the current room
temperature. Temperature value can be changed from °C or °F when button is
pressed and held for 5 seconds.
Sleep Mode Auto Button*: Pressing will activate sleep mode timer
selection. Pressing the
the unit automatically turning off.
1 Touch Soft Air Button: Adjusts the air flow to deflect supply air away
from blowing directly onto room occupants.

Remote Controller

Description
and placing the unit into energy
allows you to select up to 7 hours prior to
9