Table of Contents
Advertisement
1. After loading laundry and detergent,
press the Aan/Uit-Marche/Arrêt
button for some seconds to activate
the appliance.
2. Load the laundry one item at a time.
3. Put the detergent and the additives in
the appropriate compartment.
4. Turn the programme dial to the
washing programme. The display
shows the default temperature and
spin. If necessary, change them
according to your laundry. The
display also shows the maximum
recommended load for washing
phase.
5. Set the desired options, if there are
available.
6. Touch the Modus-Mode button once
to activate also the drying function.
The Wassen-Lavage and Drogen-
Séchage indicators come on. The
indicators
and
the display. The display also shows
the maximum recommended load for
a washing and drying programme
(e.g. 5 kg for cottons).
7. Now, you can choose an automatic
drying level or a specific timed
drying.
13.2 Washing and Drying -
Automatic levels
1. Tap on the Droogtegraad-Niveau
séchage button repeatedly until the
display shows the required dryness
level. The indicators in the display
illuminate accordingly:
a.
Iron dry: for cotton
items;
b.
Cupboard dry: for
cotton and synthetic items;
c.
Extra dry: for cotton
items.
The time value on the display is the
duration of both cycles washing and
drying, calculated on a default load
size.
2. Touch button Start/Pauze-Départ/
Pause to start the programme. The
PROSENSE estimation starts.
In the display the door locked
indicator goes on, the indicator of the
running phase starts flashing.
The display also shows the remaining
programme time.
13.3 Washing and Timed
Drying
1. Tap on the button Tijd-Minuterie
repeatedly to set the desired time
value (see the "Timed drying" table
the "Programmes" chapter). The
appear on
drying level indicator goes off and the
indicator
Each time you tap on this button the time
value increases by 5 minutes. The
display shows the set new time value.
2. Touch the Start/Pauze-Départ/Pause
to start the programme. The
ProSense estimation starts.
In the display the door locked
indicator comes on and the indicator of
the running phase starts flashing.
The display also shows the remaining
programme time.
13.4 At the end of the drying
programme
• The appliance stops automatically.
• The acoustic signals operate (if they
are active).
• In the display
• The indicator of button Start/Pauze-
Départ/Pause goes off. The door
locked
• Press the button Aan/Uit-Marche/Arrêt
for some seconds to deactivate the
appliance.
To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too
low spin speed for the items
to be washed and dried.
comes on.
comes on.
goes off
ENGLISH
33
Advertisement
Table of Contents
