Hanns.G HK241DPB User Manual page 17

OSD TIME-OUT
OSD COLOR
SYSTEM
AUDIO INPUT
VOLUME
MUTE
DDC/CI
FACTORY RESET
INFORMATION
the OSD. Enter the option and adjust the level.
Select 「 OSD TIME-OUT 」 option to set the OSD time out from
10 to 100 seconds. Enter the option and adjust the level.
To choose the color combination of the OSD window, select
「 OSD COLOR 」 option under 「 OSD SETTING 」 menu, choose
modes 1/2/3.
While transferring via the HDMI port, it is recommended to set
AUDIO INPUT to HDMI; if no sound is outputted, it is
recommended to select AUDIO INPUT as PC, and make sure the
PC audio output cable is connected to monitor's LINE IN (or
AUDIO IN) port. [For HDMI Input only]
Select the 「 VOLUME 」 option to change the volume level. Enter
the option and adjust the level.
models with incorporated audio.]
● By high volume, risk of hearing damage exists.
Select the 「 MUTE 」 option to switch the function On or Off.
availability of this function depends upon the selected model.
Adjusting the volume while muted cancels Mute mode.]
Select the 「 DDC/CI 」 option to switch the function On or Off.
[Dual input mode optional]
Select the 「 FACTORY RESET 」 option to reset to the monitor's
default setting. This will erase the current settings. Enter the
option and select On or Off.
Display Horizontal frequency/Vertical frequency/Resolution
information.
17
User's Manual
[This function applies only to
[The