Important Infomation - Panasonic VL-PC3800BX Operation Instruction Manual

1. Including Items
The following items are included in addition to the power distributor.
Part
2Wire connect: AWG20,for power port
4*20 : Locked to the wall if need.
Φ6*30: For screw locked to the wall.
2. Important Information
2.1 Important Safety Information
To prevent severe injury or loss of life or property, and to ensure
proper and safe operation of your product, read this section
carefully before using the product.
WARNING
Preventing fire, electric shock, and short circuits
・ Leave installation work to the dealer. Installation work requires
technical knowledge and experience. Electrical connection work
should be performed by certified personnel only. Failure to observe
this may cause fire, electric shock, injury, or damage to the product.
Consult the dealer.
・ Use only the power supply unit VL-PC3400.
・ Do not place objects on the power cables. Install the product
where no one can step or trip on the power cables.
・ Do not allow the power cables to be excessively pulled, vent or
placed under heavy objects.
・ Make sure all connections from the power outlet to the power
supply unit are secure.
・ Never touch the power supply unit and power cables with wet
hands.
Name Count
1
2
2
・ Do not use the power supply unit for outdoor installations (it is
for indoor use only).
・ Do not disassemble or modify the product. Refer servicing to an
authorised service centre when service is required. Disassembling
the product or manipulating the product in a way not described
in the documentation may expose you to dangerous voltages and
other risks.
・ Do not touch the product or the power supply unit during an ele-
ctrical storm. There may be a remote risk of electric shock from
lightning.
・ Never install wiring during a lightning storm.
・ Do not connect non-specified devices.
・ When opening holes in walls for installation or wiring, or when
securing the power cable, make sure you do not damage existing
wiring and ductwork.
・ Do not make any wiring connections when the power outlet is
turned on.
・ Do not install the product and power supply unit in the following
places:
‒ Places where the product and power supply unit may be
splashed with water or chemicals.
‒ Places where there is a high concentration of dust or high
humidity.
・ Do not push any objects through the openings of the product.
・ If any of the following conditions occur, disconnect the Ethernet
(LAN) cable from the product, disconnect the power supply unit
from the power outlet, and then refer servicing to an authorised
service centre.
‒ The product emits smoke, an abnormal smell or makes unusual
nose.
‒ The power cables are damaged or frayed.
‒ Metal objects have been dropped inside the product.
1 2