freightliner Custom Classic MT45 2022 Maintenance Manual page 136

54
06/01/2020
Remove the salt plugs at each end of the battery pack
desiccant chamber.
1. Salt Plug
Fig. 9, Removing the Salt Plugs
4. Attach the hook end of a Jameson Glow Rod (or
equivalent) to a straight section of rod. See
10 and Fig. 11.
06/01/2020
Fig. 10, Attaching the Hook to an Extension Rod
5. Locate the grommet on the end of the battery
pack desiccant near the cooling loop. Grab the
grommet with the hook-end of the Jameson Glow
Rod (or equivalent) and pull the old battery pack
desiccant out of the battery pack and discard it.
See Fig. 12.
6. Starting at the end of the battery pack with the
coolant loop, push the hooked end of the Jame-
54/6
Electrical, Instruments, and Controls
1
f547231
Fig.
06/01/2020
f547230
06/02/2020
1. Grommet
2. Extension Rod and Hook
7. Attach the hook-end of the glow rod to the grom-
Fig. 11, Assembled Hook and Extension Rod
1
Fig. 12, Removing the Battery Pack Desiccant
son Glow Rod all the way through the pack until
the hook exits the other side, as shown in
13.
met of a new battery pack desiccant. See
14.
Walk-In Van Chassis Maintenance Manual, January 2022
f547235
2
f547229
Fig.
Fig.