Little Tikes 660931C3 Assembly Instructions

Flipping the Work Table
9
To flip the Work Table, pull out the knob on the side and slightly rotate it so it is out of the way while
the table turns. Flip the table to the other side, making sure it is flat and aligned with the leg's wall.
Then, slightly rotate the knob to release it and push it back in to secure the table.
1
Add Chop Saw
10
Find the lever inside the large opening on the right side of the Work Table and push it toward the
table front. Insert the base of the Chop Saw into the opening, release the lever, and press down on
the saw until it snaps into place.
DRILL:
1. Add a drill bit to the drill by placing the end of the bit
into the hole in the front of the drill and pressing it
rmly into place (Fig. 1). To remove it, tug on the bit rmly.
2. Line the drill up on the job you're working on by using the
LED laser guide.
3. Press the trigger and the drill will make realistic sounds.
The drill bit even changes direction by pressing inward the
button on the side of the drill (Fig. 2).
FIG.1
FIG.2
FIG.3 FIG.4
3
2
USING THE CHOP SAW:
1. Release the head of the Chop Saw by
pushing the button near the back of the
saw on the left side and lifting the saw head.
2. Press the grip on the saw handle as you
bring the saw head downward and it will
make realistic chop saw noises.
3. Once you've nished using the saw, lock it
in place until you want to use it once more.
To do so, push the saw head down until you
hear a click.
NOTE: When replacing the battery, remove the
chop saw from the table by pressing the
workbench lever behind the tool. Lift the tool
out and then release the lever.
FEATURES
AUTO SHOP:
Flip to the auto shop side before beginning.
GEARS: Install the gears into the left side of the engine using the
screwdriver or drill (Fig. 3).
ENGINE INTAKE: Set the engine intake atop the engine with the
air aps pointing toward the left side and install it using two
bolts (Fig. 4).
VALVE COVER: Remove the two bolts holding the valve cover by
using the drill and the appropriate bit (Fig. 5).
SPARK PLUGS: Install the spark plugs onto the engine by
matching the shape of the plug base to the shape on the engine.
They will snap in place (Fig. 6). Once you've built your engine, it is
time to take it for a run! Attach the Phillips bit to the drill. Place
the end of the bit over the top bolt on the engine and then press
the trigger on the drill. It will rev up the engine (Fig. 7).
FIG.5
FIG.6
8
SKU: 660931C3
TOOLS REQUIRED:
(not included)
Phillips Screwdrivers
We strive to provide a durable, easy-to-assemble toy that is made to last,
FIG.7
ASSEMBLY INSTRUCTIONS
Thank you for choosing the Little Tikes® 2-in-1 Buildin' to Learn
Motor/Wood Shop™.
giving your child years of imaginative, engaging fun!
1
ENG
ADULT ASSEMBLY REQUIRED
ADULT BATTERY INSTALLATION REQUIRED