Advertisement
Quick Links
WFS05
MANUAL
Please read the manual carefully before using the video light
Specifications
Full power guide
24
number at 1m/IOS 100
Waterproof
100m
Max. power
80Ws
LED lighting
1 watt spot light and 1 watt red light
200 lm （Wide light）
Brightness(Lumen)
Color Temperature
6000K（Wide light）
Flash index level
GN/1/1.4/2/2.8/4/5.6/8/11/16/22/24
Flashes per full charge
Full power is greater than 1200 times
Recycle time
0.1s~1.5s
Battery
4*18650Li-ion batteries (3400 mAh)
Size
119 (L)x 119mm(W) x 135.5(H) mm
1050g on land (Include the battery）
Weight
240g underwater (Include the battery）
Unpacking
WFS05 Flash light
Ball mount
FLASH LIGHT
(Depends on greater than flash intensity)
O Ring
Li-ion battery
Component
⑦
⑩
Charger
To install the battery
1. Turn the tail cap counter-clockwise to open.
2. Loading the Li-ion battery into the tail cap, make sure the polarity battery
must match the polarity of the diving light contacts.
3. Turn the tail cap clockwise to reattach the tail to the head of the flash light.
02
①
②
③
⑤
⑧
⑨
①
YS Adapter
②
Screen display
③
Adjustment knob A
④
Gear knob B
⑤
Button A
⑥
Button B
⑦
Wide light
⑧
Red light
⑨
Tail cap
⑩
Remote port
⑪
⑪
Strobe Port
⑫
Indicator
Wrench
Manual
⑫
④
⑥
01
Tail cap
03
Advertisement
Related Manuals for Weefine WFS05
Summary of Contents for Weefine WFS05
- Page 1 3. Turn the tail cap clockwise to reattach the tail to the head of the flash light. Battery 4*18650Li-ion batteries (3400 mAh) Size 119 (L)x 119mm(W) x 135.5(H) mm 1050g on land (Include the battery） Weight 240g underwater (Include the battery） Tail cap Unpacking WFS05 Flash light Ball mount O Ring Li-ion battery...
- Page 2 Operate the light Brightness adjustment（Flash） (OFF state), Press the buttons A and B at the same time adjust the screen On S1/S2 mode ( it does not Flash intensity display synchronization mode) orientation mode (flip screen up and flip screen down), Press and immediately When the gear knob B is rotated to different gears, the guide number will change release the Button A enter the screen mode, Press the buttons A and hold it according to the current gear value to adjust the intensity of the flash.