Weefine Smart focus 1000 Manual

Smart focus 1000
MANUAL
Please read the manual carefully before using the video light
(LED Light)

Specifications

LED white Light: 1pcs LED CREE XP-L-HI 5500K
Parameters red light: 2pcs LED CREE XB-D 620nm
Brightness
Wide Light：1000 Lm
(Lumen)
Beam Angle
Wide Light 60 Degrees
(In water)
1 x 18650 Li-ion batteries (3400 mAh)
Battery
Turbo light：70min
Run time
Depth Rating 100m / 330ft
Over 50000 hours
LED Life
Aviation aluminum
Material
Hard anodic oxidation
Oxidation
33 (D) x 141.2 (L) mm
Size
200g land (Include the battery)
Weight
105g in water (Include the battery)
Manual Content
<Instruction>
- Component
- Specifications
- Unpacking
<How to use>

- To install the battery

- Operating Instructions

- Thermal protection
- Battery Level Indicator
- To charge the battery
<Maintenance and Warranty>
- General Maintenance
- Warning
- Warranty
- Troubles Shooting
Component
Button
Light Head
Unpacking
Video light light clamp
Hand ORope
TO install the battery
1.Turn the tail cap counter-clockwise to open.
2.Loading the Li-ion battery into the tail cap, make sure the
polarity battery must match the polarity of the diving light
contacts.
3.Turn the tail cap clockwise to reattach the tail to the head
of the video light.
Operating Instructions
Turn on：Press the Button and hold it down for 1 second,
When the light is turn on it will be in the white light mode
at 100% brightness.
②
Tail Cap
Battery Level Indicator
Strobe port
Li-ion battery
O Ring Decorative ring
Tail Cap
①
Charger
③