Whelen Engineering Company CORE CenCom CV2V Installation Manual

51 Winthrop Road,
Chester, Connecticut 06412-0684
Phone: (860) 526-9504
WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Mounting the V2V Module
WINDOW
MOUNTING
Mounting to Vehicle:
It is recommended you mount the module to the dashboard or rear deck of the vehicle however it can be mounted to any surface or
window. If mounted to a window it is recommended to use 3M SJ3560 Dual Lock tape. The module
(side with logo). This is the side that receives the signal. If mounted to a window, the face must point out of the vehicle.
©2021 Whelen Engineering Company Inc.
Form No.14D18D (032822)
51 Winthrop Road,
Chester, Connecticut 06412-0684
Phone: (860) 526-9504
WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Mounting the V2V Module
WINDOW
MOUNTING
Mounting to Vehicle:
It is recommended you mount the module to the dashboard or rear deck of the vehicle however it can be mounted to any surface or
window. If mounted to a window it is recommended to use 3M SJ3560 Dual Lock tape. The module
(side with logo). This is the side that receives the signal. If mounted to a window, the face must point out of the vehicle.
©2021 Whelen Engineering Company Inc.
Form No.14D18D (032822)
IMPORTANT: Cle an module and
mounting surface with an
IMPORTANT!
isopropyl alcohol wipe prior to
It is the responsibility of the
mounting.
installation technician to
make sure the installation
and operation of this product
will not interfere with or
compromise the operation or
efficiency of any other vehicle
equipment!
Before returning the vehicle
to active service, visually
confirm the proper operation
of this product, as well as all
vehicle components or
equipment.
For warranty information regarding this product, visit www.whelen.com/warranty
IMPORTANT: Cle an module and
mounting surface with an
IMPORTANT!
isopropyl alcohol wipe prior to
It is the responsibility of the
mounting.
installation technician to
make sure the installation
and operation of this product
will not interfere with or
compromise the operation or
efficiency of any other vehicle
equipment!
Before returning the vehicle
to active service, visually
confirm the proper operation
of this product, as well as all
vehicle components or
equipment.
Page 1
For warranty information regarding this product, visit www.whelen.com/warranty
WeCanX™ V2V Sync Module
Internet: www.whelen.com
Sales e-mail: autosale@whelen.com
Customer Service e-mail: custserv@whelen.com
Mounting to Dash, Rear Deck or other surface:
e w
u s
s i d
t (
m
l e
o n
d u
F r
M o
o f
must
WeCanX™ V2V Sync Module
Internet: www.whelen.com
Sales e-mail: autosale@whelen.com
Customer Service e-mail: custserv@whelen.com
Mounting to Dash, Rear Deck or other surface:
e w
s i d
t (
m
l e
o n
d u
F r
M o
o f
must
Installation Guide:
)
g o
p
l o 8 X 3/4 Phillips
e u
i t h
Pan Head
a c
t f Sheet Metal
Screw
be mounted face up
Installation Guide:
)
g o
p
l o 8 X 3/4 Phillips
e u
i t h
Pan Head
a c
t f Sheet Metal
u s
Screw
be mounted face up