Page 1
MT-202 MT-202 MR-202 Operating 6.0~8.4V(Ni-cd) 6.0~7.4V(Li-poly 2s) 0.26oz (7.4g) 227g Antenna (Built in) Steering Dual Rate Lever (D/R) Steering Trim Lerer (CH1) CONNECTION Connects to the steering servo Motor connector Battery connector Power switch...
Page 2
MT-202 : 1.CH1(Steering) Trim: Steering neutral adjustments can be made by moving the steering trim lever to the left or right. When you install a servo, always check to be sure the servo is at its neutral position. Adjust the servo horn position and linkage so both are parallel.
Page 3
FCC Information and Copyright This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the MT-202 and is the answer not in the manual?
Questions and answers