Table of Contents
Advertisement
CAUTION
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Installing cartridge group
If there is no or insufficient clearance between the rotor turbine blades
and the turbine diffuser, the blades and the turbine diffuser (casing) can
be damaged.
Check that the blades do not rub on the turbine diffuser by rotating
the rotor.
Remove the lifting gear.
Fit O-ring (42012).
Screw in the speed sensor (86505) together with the O-ring (86506)
and plug in the cable connector (86515).
Fit the O-ring (77005) to the wall insert (77000).
Fit the lifting gear and the swivel lifting eye (90235).
Align and fit the wall insert (77000) using the centring screw (90187).
Place the diffuser (79000) in position using the swivel lifting eye
(90235).
Remove the swivel lifting eye (90235).
Fit the screws (72002).
Operation Manual / TPL65VA32/33
8
8.9
Page 101
Advertisement
Table of Contents
