Samsung DW80B70 Series User Manual page 50

Troubleshooting
Problem
Does not dry
dishes well.
50 English
DW7000B_DW80B7070_AP_EN_FULL.indd 50
Possible cause
There is no rinse aid
in the dispenser or not
enough rinse aid was
used.
The temperature of the
water is low when the
dishwasher is running.
Too many dishes have
been loaded.
Glasses and cups with
concave bottoms hold
water. This water may
spill onto other items
when you unload.
Auto Release™ Dry is
turned off.
Multiple detergent
tablets were used
without selecting the
Sanitize option.
Solution
• Check the dispenser and add rinse
aid.
• Use a liquid type rinse aid.
• Check the rinse aid settings.
• Connect the water supply line to a hot
water supply.
• Use rinse aid with the Sanitize or
SmartDry Hi/Lo option.
• Proper loading of items can affect
drying.
• Load your dishes as recommended.
(See page 18.)
• After finishing the cycle, empty the
lower rack first and then the upper
rack. This will prevent water dripping
from the upper rack onto the dishes
in the lower rack.
• Turn Auto Release™ Dry on. Press the
Lower Rack + Hi-Temp Wash button
for 3 seconds to access the Auto
Release™ Dry menu. Select "A1" to
activate Auto Release™ Dry.
• Select the Sanitize option or use rinse
aid.
2021-12-30 10:36:14