Big League Lawns CheckMate Troy-Bilt WC33 Series Mounting Instructions

Big League Lawns CheckMate Troy-Bilt WC33 Series Mounting Instructions

Advertisement

1125 Mak Tech Dr C
Lansing, MI 48906
800.411.0150
www.bigleaguelawns.com
CheckMate™ Lawn Striping Kit For Troy-Bolt WC33 Installation Guide
Important
Big League Lawns, LLC warrants their products to be free of defects in material and workmanship.
This warranty does not cover defects due directly or indirectly to misuse, abuse, normal wear and tear,
failure to properly maintain the product or used for a purpose other than that for which it is intended.
The duration of this warranty is expressly limited to one year parts and labor beginning from the date
of delivery to the original customer.
The obligation of Big League Lawns, LLC is limited solely to the repair or replacement, at our option,
at its factory or authorized repair agent of any part that should prove deficient. Purchaser must
maintain the product under normal operating conditions at all times. Prior to operation, become
familiar with the attachment and any disconnect features. This product is not intended to be used in a
transport position or to be backed over curbs. When not in use, the product should be removed from
the mower and transported in a safe manner. Failure to follow these instructions will void the
warranty.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CheckMate Troy-Bilt WC33 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Big League Lawns CheckMate Troy-Bilt WC33 Series

  • Page 1 The obligation of Big League Lawns, LLC is limited solely to the repair or replacement, at our option, at its factory or authorized repair agent of any part that should prove deficient. Purchaser must maintain the product under normal operating conditions at all times.
  • Page 2 US Patent 6,962,039 B2, US Patent 6,993,894 B2 Mounting Instructions Troy-Bilt WC33 Series Mowers Congratulations on your new purchase! You are just steps away from creating a beautifully patterned lawn using your new CheckMate™ lawn striping roller. To ensure a long life of both your mower and roller, please be sure to follow the mounting recommendations below.
  • Page 3 Directions Unit is shipped with two 5/16" to 3/8" reducer nuts. To install, you must reverse your lowest handle bar bolt (circled) so that the threads point outward towards the tires. You will then re-secure the bolt by attaching the 5/16" end of the reducer nut.

Table of Contents