SIGNIFY CFI Day-Brite FBZ Quick Start Manual

CAUTION: THE INSTALLATION AND SERVICING OF THIS PRODUCT SHOULD
BE PERFORMED BY A QUALIFIED ELECTRICIAN OR SERVICE PERSONNEL
Wireguards are not
intended for use with
rigid mounting of the product.
They should only be used with
pendant or chain mounting.
1. Two LED wireguards are provided. The LED wireguards wrap around the outer edges of the endcaps and the
outside edges of the LED mounts (refer to center view above).
2. Each wireguard is held in place using four nylon mounts and four screws on each end of the wireguard. The
nylon mounts fit around the wire of the guard and are screwed into the long thin endcaps using #8 screws
(provided) in the locations shown in the upper right view.
IMPORTANT: A steel wire tether is supplied for each wireguard. Attach the steel wire to the wireguard by
3.
wrapping it around one of the inboard corners of the wireguard and passing one of the looped ends thru the
other looped end of the steel wire. Assemble the snap to the free end loop of the steel wire. Attach this snap
to the slot found on the inside edge of the long thin endcap between the driver compartment and the LED
mount.
CAUTION: Electrical luminaires are designed for permanent installation in ordinary (non-hazardous) locations in accordance with the National Electrical
Code and all applicable local codes. Do not use in areas of limited ventilation or in high ambient enclosures. The lamp and luminaire operate at high
temperatures. Contact with combustible materials can cause fire and personal contact can cause severe burns.
ATTENTION: Ce luminaire a été conçu pour une installation permanente dans un emplacement régulier (non dangereux) et en conformité avec le Code
électrique canadien et codes locaux applicables. Ne jamais installer dans un endroit où la ventilation est limitée ou dans des boîtiers où la température
ambiante est très élevée. La lampe et le luminaire fonctionnent à des températures élevées, un contact avec des matériaux combustibles peut engendrer un
incendie et un contact corporel peut causer de sévères brûlures
© 2021 Signify Holding. All rights reserved. This document may be subject to change. No
representation or warranty as to the accuracy or completeness of the information
included herein is given and any liability for any action in reliance thereon is disclaimed.
All trademarks are owned by signify holding or their respective owners.
SLOT BETWEEN
DRIVER COMPARTMENT
AND LED MOUNT FOR
ATTACHING TETHER
B
FBZ HIGHBAY - WIRE GUARDS
FBZ HIGHBAYS
443581598980
ATTENTION : L'INSTALLATION ET L'ENTRETIEN DE CE PRODUIT DOIVENT ETRE
EFFECTUÉS PAR UN ÉLECTRICIEN OU UN MEMBRE DU PERSONNEL QUALIFIÉ.
A
Signify North America Corporation
400 Crossing Blvd, Suite 600
Bridgewater, NJ 08807, USA
Telephone: 855-486-2216
5/7/2021
#8 SCREWS
AND
NYLON MOUNTS
(PROVIDED)
Dual LED mount
product shown.
Quad LED mount
product similar.
Signify Canada Ltd.
281 Hillmount Road
Markham, ON, Canada L6C 2S3
Telephone: 800-668-9008