Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SetPower RV45S
Summary of Contents for SetPower RV45S
- Page 1 User Manual V1.3...
-
Page 2: Table Of Contents
CONTENT 1.SAFETY INFORMATION 2.DATA SHEET 3.DESCRIPTION 4.GETTING STARTED 5.OPERATION OF RV45S 6.MAINTENANCE 7.CLEANING 8.SUGGESTIONS 9.GENERAL SAFETY MESSAGES 10.NOTICE 11.FAULTS... -
Page 3: Safety Information
● No responsible for the damage by ignoring the safety instructions SetPower. ● The use of accessories that are not recommended by SetPower can cause injuries and will invalidate any warranty that you may have. ● Place the products so that they do not collide against each other or break when the appliance is in motion. -
Page 4: Data Sheet
2.DATA SHEET SINGLE ZONE Model RV45S External dimensions 693x407x477mm( 27.3x16.0x18.8 inch) (LxWxH) Net weight 21 kg(46.3 lbs) Installed power Supply voltage ） DC 12V/24V , AC 110 -120 V ( for US) /AC 100-240V ( for AU & EU) ）... -
Page 5: Getting Started
4.GETTING STARTED Installation Please check whether the parts of Fridge/Freezer are complete after unpacking. Note: Place the unit in a dry place which is protected against splashing water. Do not place directly adjacent to sources of heat (heating, gas ovens, hot water, pipes or under the blazing sun). The normal operation of the appliance requires heat to be radiated away from the condenser located at the end of the cabinet. - Page 6 Operating your Fridge/Freezer with 12/24V DC ● Plug the 12V/24V DC power cable into the DC POWER socket (as circled) on the end of the Fridge/ Freezer and then connect to the vehicle cigarette lighter socket or suitable 12V or 24V DC power source. ●...
-
Page 7: Operation Of Rv45S
(less than 6mm direct to battery) or if there is a loose connection somewhere. ● If this occurs when you try and start your SetPower and the power supply drops under 10.9 V it will not start. - Page 8 POWERING ON Connect to the desired input voltage, press and hold the button for several seconds to turn the unit on, the display will show the current internal cabinet temperature. TEMPERATURE HIGH BATTERY PROTECTION COMPRESSOR SPEED TEMPERATURE CONTROLLER The Temperature Controller provides the ability to set the desired temperature level. The Temperature Monitor would display the actual temperature of the cabinet and set temperature.
-
Page 9: Maintenance
ENERGY SAVING TIPS Choose a well ventilated installation location which is protected from direct sunlight and allows air to circulate around the cabinet. Allow hot food to cool down first before you place it into the cabinet. Do not open or leave the lid open more often than necessary. If ice forms on the internal walls or lid defrost the appliance. -
Page 10: Notice
10.NOTICE Failure to obey the following notices could result in property damage: ● Keep sand or dirt away from the cooling system ventilation area. ● Do not leave the cooler on the deck of a boat for an extended period. Salt water damage to the cooling system, electronics, or metal hardware could occur. - Page 11 OUR GUARANTEE SetPower product comes with a 3-year warranty on the compressor and 1 year warranty on all other parts for your peace of mind. In the unlikely event this product fails when used according to our user guide, we will either repair or replace it. For full warranty terms and conditions on this product, please see the user guide.
- Page 12 official@setpowerusa.com support@setpowerusa.com 3-YEAR WARRANTY...
Need help?
Do you have a question about the RV45S and is the answer not in the manual?
Questions and answers