SAFETY INFORMATION
This product is intended for use in compliance with the local electrical
•
safety rules and should not be used where electrical sparks may be
exposed to flammable or explosive gases (gas stations, hospitals, etc.).
Use this product within operating temperature specifications.
•
This product is only intended for low voltage testing up to 60 Volts.
•
Do not use this instrument for high voltage circuits. Doing so may damage
the instrument or cause injury or death.
GENERAL WARNINGS
To retain functional integrity, keep this product dry and do not store it in
•
humid environments when not in use.
Remove batteries when not in use for extended periods to
•
prevent corrosion.
Do not expose the contacts of the connectors to moisture or dust.
•
Impacts, collisions and vibrations may cause damage to internal
•
components during transportation or use.
Avoid disassembling the instrument, as no component inside can be
•
repaired by the user.
This instrument is not intended to be used in environments with strong
•
electromagnetic interference.
4
FEATURES AND BENEFITS
The TDG310 Digital Tone and Probe Kit allows tracing and locating of single
cables or bundles that are connected to unpowered or active networks such
as phone lines, network cables or coax cables. The built-in test functions
can verify proper network termination or test for shorts in the single-ended
test mode. The tone generator can also determine the status modes of
analog telephone lines.
Features
Trace and locate cables in unpowered or live circuits.
•
Includes audible and visual strength indicators.
•
Built-in testing capacity for RJ45 termination.
•
Equipped to test PoE ports for power and speed configurations.
•
Checks status of analog phone lines.
•
Comes with a built-in high-intensity flashlight.
•
Benefits
Digital tone generation and detection rejects extraneous analog noise
•
to locate cables quickly and easily.
Trace and test cables in the same interface.
•
Identify cable types, including 2-pair or 4-pair, straight, cross or other.
•
Cable scan and continuity testing for UTP, STP, RJ45, and RJ11 cables.
•
Identify the status in the working telephone line: standby, ringing
•
or off-hook.
Quickly detect the near-end, mid-end and far-end cable faults.
•
The RJ45 port withstands a maximum voltage of 60VDC and the wire can
•
be traced directly to a powered PoE port.
Perform continuity tests on shielded cable and shielding layers.
•
PD powered detection detects whether the power output of the PoE switch
•
is normal and detects the pins used for the power supply.
Switch between Audible or Silent mode.
•
Work in the dark with the built-in high-intensity LED flashlight.
•
5