Changing The Flash Mode - AGFA ePhoto 780 User Manual

Taking Pictures (cont.)
To change the resolution, press the Resolution button repeatedly until the desired setting is
shown on the Status Display.

Changing the Flash Mode

The ePhoto 780 provides four flash modes:
To change the flash mode, press the Flash button repeatedly until the desired setting is
shown on the Status Display.
! Note: The resolution and flash mode remain in effect until you change them, even if you turn
the camera off.
9
9
320 x 240 pixels (lowest resolution)
640 x 480 pixels with moderate compression
640 x 480 pixels with low compression
780 mode, 1024 x 768 pixels (highest resolution)
Off (No flash used)
Auto (Flash used as needed)
Red-eye (Automatic flash with pre-flash to reduce "red-eye" effect)
Forced (Flash always used)