Sylvania SDVD1052 Instructions Manual page 18

In Video Setup Page:
1. If Picture is selected, using the Direction and ENTER/OK Buttons to set the panel image quality
such as Sharpness; Brightness; Contrast; Hue or Saturation as desired.
2. If Panel Quality is selected, using the Direction and ENTER/OK Buttons to set the image quality
of the connected TV such as the Sharpness, Brightness, Contrast, Gamma, Hue or Saturation.
In Preference Page:
1. If TV Type is selected, using the Di
(Note: The TV system in US, Canada and Mexico is NTSC).
2. If Audio, Subtitle or Disc Menu is selected, using the Direction and ENTER/OK buttons to select and
set the priority of the available language.
3. If Parental is selected, using the Direction and ENTER/OK Buttons to set the rating level:
▲
▼
~ Press the or
~
Press the ENTER/OK Buttons to enter, password enter window will pop up.
~ Enter the four digit password ( default password is 0000 ) by pressing the Numeric Buttons.
~ Press the ENTER/OK Buttons to save the settings and exit.
~ Rate levels:
1. Kid Saf: Kid safe
2. G:All ages
3. PG:Parental Guidance
4. Pg13:Parental Guidance less than 13 years old
5. Pgr:Under 17 years old, Parental Guidance suggested
6. R:Under 17 years old, Parental Guidance strongly
7. Nc17:17 years old or above
8. Adult: Adult only
4.
If Password is selected, press the ENTER/OK Buttons to enter, the subsetting menu will appear.
~ If Password Mode is selected, using the Direction and ENTER/OK buttons to set it On ( activate
the rating level setting ) or Off ( Password is needed ).
~ If Password is selected, press the ENTER/OK Buttons twice to enter. The New password setting
menu will appear.
~ Enter the four digit password. The Column of NEW Password will be highlighted.
~ Enter the new four digit password. The Column of Confirm Pwd will be highlighted.
~ Enter the new password again. OK Button on the screen will be highlighted. Press the ENTER/OK
Buttons to save the setting and exit.
5. If Default is selected, using the Direction and ENTER/OK Buttons to reset all setting to default setting
or press the SETUP Button to exit without changes.
rection and ENTER/OK
(Functions depend on the recording of DVD).
Button to select the desired level.
18
PAL, AUTO or NTSC.
Buttons to set to