Table of Contents
Advertisement
AIR OR CABLE CONTROL INSTALLATION w/ U-LOCK (OPTION)
The Universal Body Lock (U-Lock) can be installed with a standard 3-section valve and
operated from the cab (see Pgs. 6-7 to 6-10 for routing). A separate indicator light and harness
will be provided to be installed in the truck cab. This will notify the operator when the U-Lock
has been engaged or disengaged.
1.
Review all directions and diagrams provided before starting installation.
2.
Mount valve to the hoist's Main Frame and attach all hoses, hose clamp
assemblies and fittings as shown on Pg. 6-11.
3.
Mount Indicator Light Box in the truck cab where it will
be clearly visible to the operator.
4.
Route Indicator Light and Harness (Pt. No.
40P60) from the truck cab to the U-Lock
cylinder.
5.
Hardwire or plug in provided 12V
adapter for indicator
light.
2-8
Section II: Installation
NOTE:
AS A SAFETY MEASURE, THE JIB CYLINDER IS
DISENGAGED WHENEVER THE U-LOCK IS
ENGAGED.
2.0.INS.SL-518
Advertisement
Table of Contents
