Beko BFL104ADW User Manual page 21

• Steam
Use this function to reduce the creases and ironing time of a small amount of cotton, synthetic or mixed
laundry. This function can be selected on the following cycles (See 4.3.12 Programme and consumption
table): Cottons, Synthetics, Daily-Quick / Quick 14', Daily-Quick / Quick 14' + Fast+, Bedding & Blanket,
Shirts, Mix, Dark Care / Jeans, Towel. This function works better on a small or half load. Vapour is distributed
inside the machine during drum rotation. It is normal that steam vapour may not be visible during the cycle.
• AutoDose
With this auxiliary function key, you can change your detergent and dose preferences. For detailed information,
see 4.2.6.2 "Dose Selection and Cancellation or Powder Detergent Use"
• Remote Control
You can use this auxiliary function button to connect your product to smart devices. For detailed information,
see 4.3.15 HomeWhiz and Remote Control Functions.
• Specialised Programme
This auxiliary function can be used for Cottons and Synthetics programmes only with the HomeWhiz
application. When this auxiliary function is enabled, you can add up to 4 additional rinse steps to the
programme. You can select and use some auxiliary functions even though they are not found on your product.
You can increase and decrease the time of the Cottons and Synthetics programmes within a safe range.
C
When the Specialised Programme auxiliary function is selected, washing performance and energy consumption will be
different than the value indicated.
• Auto Dosing Setting
This function can only be used with the HomeWhiz application. With this function, the dosing amounts of the
Liquid Detergent and Softener are changed. For all programmes, dosing will be performed based on the latest
settings you have selected until you select a new setting.
4.3.8.2 Functions/Programmes Selected by Pressing the Function Keys for Three Seconds
• Drum Clean
To select this programme, press and hold the auxiliary function button 1 for 3 seconds. Use it regularly (every
1-2 months) to clean the drum and ensure the required hygiene is provided. Steam is applied before the
programme to soften the residues in the drum. Run the programme while the machine is totally empty. For
better results, put powder lime-scale remover for washing machines into the detergent compartment no. "2".
When the programme is over, leave the loading door ajar so that the inside of the machine gets dry.
C
This is not a washing programme. It is a maintenance programme.
Do not run this programme when there are any objects in the machine. If you try to do so, the machine will automatically
detect that there is load inside and abort the programme.
• Anti Crease+
If you press and hold the spin selection button for 3 seconds, this function will be selected and the programme
follow-up light of the relevant programme will turn on. When this function is selected, the drum will rotate for up to
eight hours to ensure that the clothes do not crease at the end of the programme. At any time during these eight
hours, you can cancel the programme and unload the machine. Press the function selection key or the machine
on/off key to cancel the function. The programme follow-up light will remain on until the function is cancelled or
the step is complete. If the function is not cancelled, it will also be enabled in the next washing cycles.
• Softener Selection
Press and hold the Auxiliary Function (Automatic Dosing) button 2 for 3 seconds to select this function. If you
select this function while the softener symbol is active on the display, softener will become off. If you select
this function while the softener symbol is inactive on the display, softener will become on.
Washing Machine / User's Manual
21 / EN