Add Device - Lloyd's LC-1303 Quick Installation Manual

Add device

Once the NVR is installed and connected to a monitor via the HDMI or VGA cable, right-click with the
help of the mouse (1), then click on "System"
User: Admin
Password: admin (3)
Click "OK" (4).
1
From Main Menu, click on "Network Configuration" (5), check the "DHCP Enable" box for automatic
set-up (6), or if desired, you can set-up the network parameters manually. Click on "P2P ID: Set" (7).
5
Open the Lloyds Smart app on your smartphone, select "+" (upper right corner) (8), click on the
2
8
(2) and log in with the default data.
4
19
3
6
7
9
icon (9).