Safety Warnings - Lloyd's LC-1303 Quick Installation Manual

Introduction
This guide will assist you in the process of connection and the use of the high-resolution surveillance
system w/recorder (NVR) that you have just purchased.
For more information, please refer to the detailed manual by scanning the following QR code:
Or enter the following link:
http://lloydscorp.com/qr/lc-1303-man/
We recommend you to connect and test everything before the permanent installation to make sure it
works correctly.

Safety warnings

1) Select the correct power supply to connect the equipment.
2) In case that the equipment does not work properly, immediately contact the service center, do not
disassemble or replace parts on your own.
3) To clean the camera lens, be sure to use an air blaster or a specialized lens cleaner.
To clean the NVR's plastic housing, use a soft dry cloth. Do not use detergents or abrasive liquids.
4) Do not drop any objects on the device or hit the equipment hard.
5) Do not aim the cameras towards a direct light source or lamp.
6) Avoid using this equipment in any environment other than the suggested in this manual.
7) Avoid any contact of water or another kind of liquid with the equipment.
Image sensor
Illumination
Day and night mode
Image Resolution
Video resolution
Motion detection
Privacy zone
Operating temperature
Humidity
Altitude
Atmosphere
Technical specifications (cameras)
1/2.9" 2M Pixel CMOS
0.1 Lux@F1.2 (Color mode), 0.05 Lux@F1.2 (Black and white mode);
0 Lux (Infrared light)
IRC automatic filter (colors: black, white and plain black)
1920x1080@20fps
Main stream: 1920x1080, 1280x720, 720x576, 640x480
Secondary stream: 640x480, 480x360, 352x288, 176x144
It supports 4 motion detection areas
It supports 4 privacy areas
Operating conditions
14 °F~122 °F (-10 °C~50 °C)
0%~90% RH (without condensation)
-60m~3000m
86kpa~106kpa
14