Advertisement
Resetting the module to change the WiFi connection
You can reset the module by pressing and holding the RESET button for at least 10 seconds.
By doing so, the module will disconnect from the Wi-Fi network to which it was connected.
After resetting, the Wi-Fi configuration procedure can be repeated again by selecting
Wi-Fi CONFIGURATION from the drop-down menu.
Deleting the stove entered
To delete the stove entered, press the menu symbol (3 dots) on the bar, then press
DELETE STOVE in the drop-down menu.
Once the stove has been deleted, you can repeat the initial procedure to enter a new stove.
9
Advertisement
