Advertisement

Quick Links

FSE74747P
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading

Summary of Contents for AEG FSE74747P

  • Page 1 FSE74747P User Manual Dishwasher USER MANUAL...
  • Page 2: Table Of Contents

    13. ENVIRONMENTAL CONCERNS..............28 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 ENGLISH of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a...
  • Page 4: Safety Instructions

    The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 15 place settings. • If the supply cord is damaged, it must be replaced by •...
  • Page 5 ENGLISH • Make sure that the parameters on the • If the water inlet hose is damaged, rating plate are compatible with the immediately close the water tap and electrical ratings of the mains power disconnect the mains plug from the supply.
  • Page 6: Product Description

    2.6 Disposal peripherals such as baskets and lids. • Concerning the lamp(s) inside this...
  • Page 7: Control Panel

    ENGLISH • The red light flashes when the The Beam-on-Floor is off appliance has a malfunction. when the appliance is deactivated. 4. CONTROL PANEL On/Off button / Reset button EXTRAS buttons Delay Start button AUTO Sense program button Display MY TIME selection bar 4.1 Display 4.2 ECOMETER The ECOMETER indicates how the...
  • Page 8: Programme Selection

    Indicator Description Drying phase indicator. It is on when you select a programme with the dry‐ ing phase. It flashes when the drying phase operates. Refer to "Pro‐ gramme selection". 5. PROGRAMME SELECTION 5.1 MY TIME The appliance senses the degree of soil and the amount of dishes in the baskets.
  • Page 9 ENGLISH 5.4 Programmes overview Programme Dishwasher Degree of soil Programme phases EXTRAS load Quick Crockery, Fresh • Dishwashing 50 °C • ExtraPower cutlery • Intermediate rinse • GlassCare • Final rinse 45 °C • AirDry Crockery, Fresh, lightly • Dishwashing 60 °C •...
  • Page 10: Basic Settings

    Consumption values Water (l) Energy (kWh) Duration (min) 1)2) Programme Quick 10.9 0.610 11.8 0.880 1h 30min 11.9 0.970 2h 40min 12.2 1.140 11.0 0.757 AUTO Sense 12.2 1.140 Machine Care 10.5 0.590 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values.
  • Page 11 ENGLISH Number Setting Values Description Latest pro‐ Enable or disable the automatic selection gramme selec‐ Off (default) of the most recently used programme and tion options. 1) For more details, refer to the information provided in this chapter. How to enter setting mode You can change the basic settings in setting mode.
  • Page 12 6.2 The water softener The water softener should be adjusted according to the hardness of the water in The water softener removes minerals your area. Your local water authority can from the water supply, which would have advise you on the hardness of the water a negative effect on the washing results in your area.
  • Page 13 ENGLISH rinse phase. It is possible to set the released quantity of rinse aid. Water softener lev‐ Amount of water When rinse aid chamber is empty, the rinse aid indicator is on notifying to refill rinse aid. If the drying results are satisfactory while using multi-tablets only, In case of the high water softener setting, it is possible to deactivate the dispenser...
  • Page 14: Before First Use

    6.6 Key tones CAUTION! Do not try to close the The buttons on the control panel make a appliance door within 2 click sound when you press them. You minutes after automatic can deactivate this sound. opening. This can cause damage to the appliance.
  • Page 15: Daily Use

    ENGLISH CAUTION! The compartment (B) is for rinse aid only. Do not fill it with detergent. CAUTION! Only use rinse aid designed specifically for dishwashers. 6. Turn the cap of the salt container 1. Open the lid (C). clockwise to close the salt container. 2.
  • Page 16 8.1 Using the detergent 8.2 How to select and start a programme using MY TIME selection bar 1. Slide your finger across MY TIME selection bar to choose a suitable programme. • The light related to the selected programme is on.
  • Page 17 ENGLISH 8.4 How to start the AUTO Make sure that there is Sense program detergent in the detergent dispenser before you start a 1. Press new programme. • The light related to the button is 8.8 Opening the door while •...
  • Page 18: Hints And Tips

    9. HINTS AND TIPS 9.1 General 9.2 Using salt, rinse aid and detergent Follow the hints below to ensure optimal cleaning and drying results in daily use • Only use salt, rinse aid and detergent and to protect the environment.
  • Page 19: Care And Cleaning

    ENGLISH 4. When the programme is completed, • Do not wash in the appliance items adjust the water softener according that can absorb water (sponges, to the water hardness in your area. household cloths). 5. Adjust the released quantity of rinse •...
  • Page 20 10.4 External cleaning 1. Use a descaler or a cleaning product designed specifically for • Clean the appliance with a moist soft dishwashers. Follow the instructions cloth. on the packaging. Do not put dishes • Only use neutral detergents.
  • Page 21 ENGLISH 4. Wash the filters. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 10.6 Cleaning the lower spray We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes.
  • Page 22 3. To install the spray arm back, press it downwards. 4. To install the spray arm back, press the spray arm upwards and simultaneously turn it counterclockwise until it locks into place.
  • Page 23: Troubleshooting

    ENGLISH element (B) counterclockwise and pull the spray arm downwards. 4. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. Run the water through the holes to wash soil particles away from the inside.
  • Page 24 Problem and alarm code Possible cause and solution You cannot activate the ap‐ • Make sure that the mains plug is connected to the mains pliance. socket. • Make sure that there is no damaged fuse in the fuse box.
  • Page 25 ENGLISH Problem and alarm code Possible cause and solution The level of water inside the • Switch the appliance off and on. appliance is too high. • Make sure that the filters are clean. The display shows iF1. • Make sure that the outlet hose is installed at the right height above the floor.
  • Page 26 The PNC can be found on the rating WARNING! plate on the appliance door. You can We do not recommend using also check the PNC on the control panel. the appliance until the Before checking the PNC, make sure the problem has been appliance is in the programme selection.
  • Page 27 ENGLISH Problem Possible cause and solution Unusual foam during washing. • Use the detergent designed specifically for dishwash‐ ers. • Use a detergent from a different manufacturer. • Do not pre-rinse dishes under running water. Traces of rust on cutlery. •...
  • Page 28: Technical Information

    12. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 550 Voltage (V) 220 - 240 Electrical connection Frequency (Hz) Water supply pressure bar (minimum and maximum) 0.5 - 10 MPa (minimum and maximum) 0.05 - 1.0...
  • Page 32 www.aeg.com/shop...

Table of Contents