Log Placement - Empire Comfort Systems VFD26 Series Installation Instructions And Owner's Manual

1. Place front logs (#1 and #2) between front grate flange and
main burner. Align notches on front logs with locator tabs in
base.
2. Place middle log (#3) between front and rear loop of burner.
NOTICE: Do not place log on top of pilot assembly.
3. Place rear log (#4) on rear log shelf. Bottom flange of log must
be placed between the log shelf and burner tube.
4. This step is optional for VFD26FP3L10 log sets. Place front
twig (#5) onto (#1) log and flat area on (#3) log. The bottom
of the front twig is to be placed behind the grate tang that is
second from the left.
Page 16

LOG PLACEMENT

4
5
3
Attention: Do not use Figures 12 and 13 to order logs. Refer to
Pages 34 to 35, Parts list and Page 36, Parts View to order logs.
Refer to Figure 12 for the following warning.
Failure to position the parts in accordance with this diagram or
failure to use only parts specifically approved with this heater
may result in property damage or personal injury.
Figure 12
1
Figure 13
CAUTION
2
30816-7-0814