Axial Clearance - ABB HT572335 Operation Manual

8.4
8.4
WARNING
Clearance A [mm]
CAUTION
© Copyright 2017 ABB. All rights reserved.
Disassembly and assembly

Axial clearance

Axial clearance
Physical hazards due to sharp edges on compressor wheel
The compressor wheel has sharp edges which can result in injury.
Wear safety gloves.

Wear safety gloves to protect against mechanical hazards.
The axial clearance (A) must be measured before removing and after fit-
ting the cartridge group.
Measure and note the axial clearance (A).

TPL67-C
0.31 ... 0.49
Clearances outside the tolerance
Serious damage to engines or property can be caused by clearances
outside the tolerance and excessively worn parts.
Have the components assessed and, if necessary, replaced by an

ABB Turbocharging Service Station.
Operation Manual / TPL67-C.. - TPL71-C..
8
8.4
TPL71-C
0.33 ... 0.50
Page 95