Table of Contents
Advertisement
CAUTION
© Copyright 2017 ABB. All rights reserved.
Disassembly and assembly
Installing cartridge group
Remove cover from oil connection.
Fit flange (42044) with screws (42064) and new gasket (42045).
Attach one lifting gear each to the two fins of the bearing casing pro-
vided for this purpose.
Remove supports (90450) and carefully insert cartridge group.
If the rotor blades have insufficient or no clearance, the blades and cas-
ing could be damaged.
Check that the blades do not rub on the turbine diffuser by rotating
the rotor.
Uniformly tighten the three screws (61059) with Verbus Ripp® wash-
ers (61058).
Remove the lifting gear.
Screw in the speed sensor (86505) together with the O-ring (86506)
and plug in the cable connector (86515).
Operation Manual / TPL67-C.. - TPL71-C..
8
8.7
Page 104
Advertisement
Table of Contents
