4
Type a name for your media server, and then
click Save changes.
5
Back in the Twonky Media screen, select Basic
Setup and Sharing.
» The Sharing screen is displayed.
6
Browse and select folders to share, and then
select Save Changes.
» Your Macintosh rescans the folders
automatically so that they are ready to share.
Play files from your PC
Note
•
Before you play multimedia content from the
computer, make sure that the home theater is
connected to the home network, and the media
server software is properly set up.
1
Press
(Home).
2
Select [browse PC], and then press OK.
» A content browser is displayed.
3
Select a device on the network.
» The folders in the selected device are
displayed. Depending on the media
server, the folder names may vary.
•
If you cannot see the folders, check that
you have enabled media sharing on the
selected device so that the content is
available for sharing.
EN
26
4
Select a file, and then press OK.
•
Some media files may not play due
to compatibility issues. Check the file
formats supported by your home theater.
5
Press the play buttons to control play (see
'Play buttons' on page 15).
Karaoke
Available only in selected model and region
Play a Karaoke disc on your home theater and sing
along with the music.
What you need
•
A Karaoke microphone.
•
Karaoke discs.
Caution
•
To prevent loud feedback or unexpected noise,
turn the microphone volume to the minimum
before you connect the microphone to your
home theater.
1
Connect a karaoke microphone to the MIC
connector on your home theater.
2
Switch your TV to the correct source for
your home theater.
3
Make sure that audio post processing is
enabled on your home theater (see 'Speaker
settings' on page 30).
4
While playing a karaoke disc, press
OPTIONS.
» The options menu is displayed.
5
Select [Karaoke], and then press OK.
» The karaoke setup menu is displayed.
6
Press the Navigation buttons (up/down) and
OK to change the following settings:
•
[Microphone]: Turn the microphone on
or off.
•
[Microphone volume]: Change the
microphone volume.
•
[Echo]: Change the echo level.
•
[Key]: Change the pitch to match your
voice.
•
[Vocal support]: Turn the vocals on or off.