Samsung STP-103S Operator's Manual page 17

ESC ! n
[Name] Select print mode(s)
[Format] ASCII ESC
Hex 1B
Decimal 27 33
[Range] 0 ≤ n ≤ 255
[Description] Selects print mode(s) using n as following table in next page.
Bit Off/On Hex Decimal Function
0 Off 00 0 24 character (font A : 12 ×24)
On 01 1 42 character (font B : 9 ×24)
1 Off 00 0 Undefined
On 02 2 32 character (font A : 12 ×24)
2 - - - Undefined
3 Off 00 0 Emphasized mode not selected.
On 08 8 Emphasized mode selected.
4 Off 00 0 Double-height mode not selected.
On 10 16 Double-height mode selected.
5 Off 00 0 Double-width mode not selected.
On 20 32 Double-width mode selected.
6 - - - Undefined.
7 Off 00 0 Underline mode not selected.
On 80 128 Underline mode selected.
ESC $ nL nH
[Name] Set absolute print position
[Format] ASCII ESC
Hex 1B
Decimal 27
[Range] 0 ≤ nL ≤ 255
0 ≤ nH ≤ 255
[Description] Sets the distance from the beginning of the line to the position at
which subsequent characters are to be printed.
The distance from the beginning of the line to the print position
is [(nL + nH ×256)×(vertical or horizontal motion unit)] inches.
ESC % n
[Name] Select/cancel user-defined character set
ASCII ESC
Hex 1B
Decimal 27
[Range] 0 ≤ n ≤ 255
[Description] Selects or cancels the user-defined character set.
When the Least Significant Bit(LSB) of n is 0, the user-defined
Character set is canceled.
When the LSB of n is 1, the user-defined character set is selected.
! n
21 n
n
$ nL nH
24 nL nH
36 nL nH
% n
25 n
37 n
32
ESC & y c1 c2 [x1 d1... d(y X x1)]...[xk d1...d(y X xk)]
[Name] Define user-defined characters
ASCII ESC & y c1 c2 [x1 d1... d(y X x1)]...[xk d1...d(y X xk)]
Hex 1B 26 y c1 c2 [x1 d1... d(y X x1)]...[xk d1...d(y X xk)]
Decimal 27 38 y c1 c2 [x1 d1... d(y X x1)]...[xk d1...d(y X xk)]
[Range] y = 3
32 ≤ c1 ≤ c2 ≤ 126
0 ≤ x ≤ 12 (Font A (12×24))
0 ≤ x ≤ 9 (Font B ( 9×24))
0 ≤ d1... d(y × xk) ≤ 255
[Description] Defines user-defined characters. y specifies the number of bytes in
the vertical direction. C1 specifies the beginning character code for
the definition, and c2 Specifies the final code. x specifies the
beginning character code for the definition, and c2 specifies the final
code.
ESC * m nL nH d1... dk
[Name] Select bit-image mode
[Format] ASCII ESC *
Hex 1B 2A
Decimal 27 42
[Range] m = 0, 1, 32, 33
0 ≤ nL ≤ 255 , 0 ≤ nH ≤ 3 , 0 ≤ d ≤ 255
[Description] Selects a bit-image mode using m for the number of dots specified
by nL and nH, as follows:
Vertical Direction
m Mode
Number
of Dots
0 8-dot single-density 8
1 8-dot double-density 8
32 24-dot single-density 24
33 24-dot double-density 24
ESC - n
[Name] Turn underline mode on/off
ASCII ESC
Hex 1B
Decimal 27 45
[Range] 0 ≤n ≤2, 48 ≤n ≤50
[Description] Turns underline mode on or off, based on the following values of n:
n Function
0,48 Turns off underline mode
1,49 Turns off underline mode(1-dot thick)
2,50 Turns off underline mode(2-dot thick)
m nL nH d1... dk
m nL nH d1... dk
m nL nH d1... dk
Horizontal Direction(*1)
Dots Dots
Number of Data (k)
Density Density
nL + nH × 256
67 DPI 100 DPI
67 DPI 200 DPI nL + nH × 256
200 DPI 100 DPI (nL + nH × 256) × 3
200 DPI 200 DPI (nL + nH × 256) × 3
- n
2D n
n
33