Vestil COL-3-26-14 Instruction Manual

Crossover ladders

Hide thumbs Also See for COL-3-26-14:

Download this manual

COL-3-26-14 Crossover Ladders

Receiving instructions:

After delivery, IMMEDIATELY remove the packaging from the Hook-Base in a manner that preserves the packaging

and maintains the orientation of the product in the packaging; then inspect the product closely to determine whether it

sustained damage during transport. If damage is discovered during the inspection, immediately record a

complete description of the damage on the bill of lading. If the product is undamaged, discard the packaging.

NOTES:

1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product

is used is exclusively the responsibility of the owner/end-user.

2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either:

a) Instructions in this manual; or

b) Information provided on labels affixed to the product. Neither is Vestil responsible for any consequential damages

sustained as a result of failing to exercise sound judgment while assembling, installing, using or maintaining this

product.

Vestil Manufacturing Corp.

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703

Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868

Url: www.vestilmfg.com

Instruction Manual

Fax: (260) 665-1339

Email: sales@vestil.com

Page 1 1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product is used is exclusively the responsibility of the owner/end-user. 2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either: a) Instructions in this manual; or b) Information provided on labels affixed to the product.
Page 2: Signal Words
 DO NOT attempt to resolve any problem(s) with the product unless you are both authorized to do so and certain that it will be safe to use afterwards.  DO NOT modify the product in any way UNLESS you first obtain written approval from Vestil. Unauthorized modifications might make the lift unsafe to use.
Page 3 Exploded Parts Diagram and Bill of Materials...
Page 4 Label placement diagram: The product should be labeled at all times as shown in the diagram below. Replace any label that is damaged and/or unreadable. Label 287: product specifications Label 821: apply to platform flange on both sides Label 740: apply to step on both sides...
Page 5: Limited Warranty
(you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid.