Operating The Dishwasher - Bosch Ascenta SHE3ARF2UC/07 Use & Care Manual

Operating the Dishwasher

Start the dishwasher:
Press the On/Off button.
1
One of the wash cycle LEDs will be flashing. You can now select a wash cycle.
2
Press the Cycle Select arrow buttons to select the desired wash cycle.
3
Press Start to begin the cycle.
4
Delay start:
Press the On/Off button.
1
Select a cycle.
2
Press the Delay Start button. Release when the desired delay time is shown in the display window
3
or the appropriate LED is lit (depending on model).
Press Start to begin the cycle.
4
Cancel a cycle:
Press and hold Start for 3 seconds.
1
Wait about 1 minute until the "Clean" LED illuminates, indicating it is done draining.
2
Press the On/Off button. You may now start a new cycle.
3
Child Lock:
After starting a cycle you can activate the Child Lock.
1
Press and hold the < button until the "Child Lock" LED illuminates or "CL " appears on the display.
2
"CL " disappears from screen when button is released.
3 Child Lock is now active and buttons will not function, except On/Off.
To deactivate, press and hold the < button until the "Child Lock" LED turns off or "CL " disappears
4
from the display.
For models with display:
To enter options mode:
With the door closed, press the On/Off button to turn the unit on.
1
The countdown display and one of the wash cycle LEDs will be flashing.
2
Press and hold down the > button, then press and release the Start button. Now release the > button.
3
4 The "Sanitized" LED will be flashing. You are now in options mode.
Press the > button to select the option you would like to adjust.
5
To set amount of Rinse Aid:
Note: If your glasses have spots on them, you need more rinse aid. If your glasses have streaks on them, you
need less rinse aid.
Follow the prior instructions to enter options mode.
1
With the display showing "r:00" - "r:06" press the < button to change the amount of rinse aid dis-
2
pensed.
r:00 = rinse aid is OFF
r:03 = medium amount of rinse aid dispensed
r:06 = highest amount of rinse aid dispensed
Press Start to save your setting.
3
To turn Extra Dry Heat ON or OFF:
1 Follow the prior instructions to enter options mode.
With the display showing "d:00" or "d:01" press the < button to turn Extra Dry Heat ON or OFF.
2
d:00 = Extra Dry Heat is OFF
d:01 = Extra Dry Heat is ON
3 Press Start to save your setting.
13