Haier HVS1000 Operation Manual page 9

Preparation
1.Power supply 2.Water supply
Plug in the power supply 220-240V~/50HZ Turn on the tap ensure that the water in clear.
Caution:Before staring the washing machine turn on the water
faucet to ensure the water faucet and the water inlet hose are
connected correctly and do not leak
4.Detergent selection 3.Laundry treatment
Only special low foam detergent should Sort out clothes according to type and extent of dirt.There are
be used in automatic drum washing three types of clothes:cotton,synthetical and woolen (silk) fabrics.
mashine,form blended or wool fabrics
Separate white clothes from colored.If whites and coloreds
special deter-gent should ne used.dry
are combimed for one load,make sure the coloreds are colorfast
clearning solvent should not be used
such as trichhloroethy-lene or alike
(caution :load the required amount of
detergent only).
-Clothing with frayed edges or yams should be put in a wash
bag or special bag before washing
-repair damged clothing,lose buttons or damaged zips
and hooks before washing.
-Bed sheets and table ware should be loosely loaded and not
folded.
This washing mashine is for househould use and designed
for mechanically washable clothes.When washing,separate
unwashable clothes with reference to clothes labels.
Functions
Note.
If Program key is turned after reservation time is set and before program starts, the
reservation will be automatically cancelled.
When reservation feature is activated, the washing start time is fixed. There will be so me
difference between the reserved time and the actual program completion time due to different
water inlet time and load distribution condition during spin
E. LCD
LCD is a window to display information including washing status, washing progress,
reservation time, remaining time, heating temperature, spin
as well as to display additional features such as power clean, super clean rinse and foaming
-
auto check etc.
F. Start/Pause Key
When the washer is energized, select the desired washing program and press the Start/Paus
key. The indicator lamp on the upper left corner of the key will illuminate to indicate that the
washer has started operation. If it needs to pause the washing process, simply press the Start/
Pause key and the indicator lamp and remining time display will blink and the washer enters into
condition. Press the Start/Pause key again to resume washing process.
(Note: Press the Start/Pause key only after the desired program and feature are set.
G. Rinse Hold Key
Press the key lightly,the screen displays the symbol.The washing machine does not drain the
water after the last rinse,but the laundry remains in a soak.To spin the laundry ,press this key
again .The symbol disappears from the screen and the program continues to the end .The
function is used to prevent the laundry creasing when left in the drum for a long time .
H. Temperature Selection Key
Press the key and LCD will display the selected heating temperature, which is adjustable as
o
needed. Note: 20 C means cold water washing and no heating is involved.
I. Spin Speed Selection Key
Press the key and LCD will display the selected spin
-
as needed. (When No Spin dry feature is selected, the time will decrease correspondingly
J. Load Selection key
Turn the Program Knob to select the desired program (see Program Setting Guidance Table)
Press the key and manually select different programs and power-saving and water-seaving fea-
ture based on the volume of load. LCD will display L-1(2,3,4,5), indicating the washing load is 1
(2,3,4,5) kg and program time will change accordingly. (The feature is not
Cashmere, Silk, Speedy, Drainage Only and Spin Only Program. Only L
Chemical Fiber program. )
-
dry process.
-
dry speed, load selection and error etc.
.
-
dry revolution speed, which is adjustable
.)
available in Wool,
–
1, 2, 3 are available for