Process Washing - Homemaker HCLT User Manual

Process washing

When the washing machine is to be connected to
the water mains .
1.Put in the laundr y and detergent,then fill with this
correct amount of washer.
Install the water inlet hose Install the water inlet hose
Insert the water inlet hose into the water-filling
entrance on the control panel.
NOTE
1.Confirm that the drain hose is properly
stowed before filling with water, or the water
will flow through the drain hose.
2.Inside the machine you will see water filling
levels-"1" "2" "3"and"MAX".
This relates to the amount of washing you are
doing.Never exceed the "MAX"Mark!
3.When the washing machine is to be
connected to the water mains using the new
hose-sets and that the old hose-sets should
not be used.
2.Close the top lid
3.Connect the power line
Confirm that the washing machine is
earthed reliably. Then insert the power
plug into the receptacle. Do not connect
the earth terminal to the gas pipe and
tap water pipe.
Water inlet hose
Water-filling
entrance
7