Before You Start; Assembly - Echo SRM-580 Operator's Manual

Before you start

Assembly

Read the operator's manual carefully to ensure that you assemble the product correctly.
Using a product that has been incorrectly assembled could lead to an accident or serious injury.
1. Handle assembling bracket (upper)
2. Handle assembling bolt (8 mm)
3. Washer
4. Handle assembling bracket (lower)
5. To engine
1. Wire fixing clips
2. Shaft tube
1. Right hand U-handle
2. Right handle assem-
bling bracket
WARNING
3. Throttle wire
3. Right handle assem-
bling bolt
4. Handle assembling bolt
(8 mm)
Before you start
U-handle assembly
Install handle assembling bracket (upper) in handle assembling
bracket (lower) and fix handle by tightening handle assembling
bolt (8 mm) lightly.
Adjust inclination of handle to adequate position (easy to oper-
ate) and tighten firmly handle assembling bolt (8 mm).
Install the handle so that it does not hide any of the
safety decals.
To eliminate loosening of throttle wire fix it to shaft tube (2 places)
with wire fixing clips.
Adjust U-handle
Loosen 4 right handle assembling bolts and handle assembling
bolt (8 mm).
16
CAUTION