Haier GWT700AW User Manual page 7

Cycle Signal
• Signal volume can be adjusted soft–loud or off.
Soil Level
• Select clothes soil level.
• Wash cycle increases 2 minutes for each level increased.
Temperature Wash / Rinse
• To select inlet water temperature for wash and rinse.
Auto Temp Control
• Models with this feature will automatically adjust water to the proper
temperature.
Power Off
• If washer is ON push button once to shut off the power.
Start / Pause
• Once washer is powered and selections are chosen, push this button once to
start the wash.
• While unit is working, push this button once to pause it.
• If unit is in pause mode, push this button once to resume operation.
Delay Start Indicator
• Indicates remaining minutes when cycle is in progress.
• Indicates remaining hours during delay process.
• Indicates faults codes or conditions that are not normal.
Note: Total time may be affected by water inlet and drain time. It may also be
affected by the water pressure. Normal, Heavy and Cotton programs
could combine the process of soak during which the washing machine
first soaks for about 20-30 minutes with slight agitation after water filling
and then begins to wash.
Time List of Each Program (minute)
PROGRAM TOTAL TIME (min)
Including Soak
Whites About 75-81 About 45-51
Heavy About 77-83 About 47-53
Normal About 59-69 About 39-49
Quick Wash
Delicate
Hand Wash
Not Including Soak
About 25
About 36-42
About 38-44
English
6