Everflourish EMW202ST Instruction Manual

Item no. Transmitter EMW202ST

Functions

A.
1. Fix code, no need to pair
2. Manual button to control receiver ON/OFF.
B.

Diagram

No. Description
1 LED indicator
2 ON OFF
C.

Instruction

a) Take off the insulation sheet from the battery cover on the back of the remote
b) Press ON/OFF button on the transmitter to switch the receiver ON/OFF
c) If the LED indicator does not light when the ON/OFF button is pressed, please replace the battery
D.
Caution
1. When the battery of transmitter is in low voltage, it influences product transmitting distance
E.

Specification

Transmitter battery: CR2032 DC3V
Frequency: 433.92 MHz
Distance: Up to 25 meters in open area

FCC CAUTION:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
Instruction Manual
Remote control
1
2
Function
Light up when ON/OFF button is pressed
Switch ON/OFF the receiver