Manual Code Search - One for All OARN03S User Manual

3.
Press and hold the device key you want to program (the
POWER key illuminates).
While you're holding down the device key, use your other
hand enter the first five-digit code for your brand in the
code list (the POWER key turns off after the first digit).
4.
When you've finished entering the five-digit code, keep
holding down the device key and look at the POWER key.
Is the POWER key illuminated?
YES: You're done! You've programmed this device key.
NO, it blinked four times and turned off: You have
either entered a code number that is not in the code lists or
missed a step in the code entry procedure. Try step 3 again.
NOTES
Test the remote with the device to make sure the device key is
programmed with the correct code for maximum functionality.
If some features don't work, try a different code in the list.
Remember to enter the code for future reference in the box
provided in the Code Retrieval section of this manual.
If your brand isn't listed in the code list, use one of the Code
Search methods to program the remote control. (Refer to the
Auto and Manual Code Search methods.)
If you release the device key any time during the Direct Code
Entry procedure, the POWER key blinks four times, and the
process is exited. The last programmed code under the device
key is retained.

Manual Code Search

The Manual Code Search lets you go one-by-one through all
the codes for the device you're trying to control. When you find
the one that operates your device, you can stop the search and
store that code.
TIPS: The Manual Code Search method may take a long time
because the remote searches through all of the codes in its
memory one-by-one. If your brand is listed in the Brand Codes
or the Code Lists, first try the Brand Code Search or the Direct
Code Entry method.
Each device key is associated with a type of device—the TV is
preset to search for TVs, SAT•CBL•DTC for satellite receivers,
cable boxes or digital TV converters, and DVD•VCR for DVD
players. To program the DVD•VCR key to control a PVR or VCR,
see the Reassigning the DVD•VCR Key to Control a VCR section.
To exit without saving a new code at any point in the Manual
Code Search, press the EXIT key.
1.
Manually turn on the device you want to control.
2.
Press and hold the device key you want to program. The
POWER key illuminates
While you're holding down the device key, use your other
hand to press and hold the remote's POWER key at the
same time. The POWER key turns off.
6