Contents Before first use Positioning of refrigerator Transportation and moving of refrigerator Energy saving tips Important information Product information Product details Controller overview Viewing and resetting minimum and maximum temperatures Changing the factory set point Changing the temperature scale Alarms Maintenance and Servicing Defrosting Cleaning...
Thank you for purchasing this Lec Medical product. Before you first use this Ward refrigerator please carry out the following actions: Check that the refrigerator has not been damaged in any way during transportation. If any damage is found it must be reported to our customer services department immediately on 0844-815-3755 ...
Ward and is designed to store contents between +2°C to +8°C. Please see below for specific product information: Model Height Width Depth Weight Refrigerant Ambient/Room No. of Door (mm) (mm) (mm) (Kg) type working shelves Type temperature WSR151 +10°C Solid R600a WSR288 1565 Solid +32°C...
Product details 1. Lock 2. Electronic Controller 3. Antimicrobial handle 4. Wire Shelf 5. Wire Basket 6. Adjustable foot (2 at front of appliance) There are also 2 roller castors at the rear of the appliance to ease product movement. Additional or replacement parts are available from our spare parts department.
Controller overview and operation 1. Menu 2. Lock keypad 3. Light (not available on all models) 4. Maximum temperature / Up 5. Power 6. Mute 7. Minimum temperature / Down 8. Set / Enter...
Changing the factory set point (the set point is the point at which the refrigerator normally holds the temperature at; in some circumstances such as high/low room temperatures it may be necessary to adjust this slightly) Hold button(s) Function Press Example screen down for To change the set point...
Warning Alarms This refrigerator has been designed to provide both an audible and visual alarm should any of the following situations occur: Door is left open for a set period Internal air temperature goes outside the set parameters, either too high or too low ...
Maintenance and Service of your Lec Medical Refrigerator Defrosting All Ward refrigerators feature automatic defrosting and, in normal conditions, means that no manual defrosting is required. However, in certain conditions (e.g. when the refrigerator is very full or when any new items of are stored in the refrigerator) frost may form on the rear wall of the appliance as the compressor must run for long periods of time.
Reversing the door In order to reverse the door please follow the below instructions. This should be carried out by 2 people for safety purposes. 1. Tilt the refrigerator backwards by 45° and lean on a vertical, hard surface such as a wall. 2.
(where applicable) WARNING: Ensure that the appliance is unplugged from the power source before commencing. WSR288 only 1. Remove the plastic cover (figures 1 and 2) 2. Unscrew and remove the light bulb (figures 3 and 4) 3. Replace with a similar 15W bulb 4.
Electrical Connection The appliance is intended for connection to alternating current. The connection values for voltage (V) and frequency (Hz) are declared on the name plate in the cabinet. Power must be connected via a wall socket with a switch. It is strongly recommended that the wall socket is easily accessible.
Disposal of your refrigerator When disposing your refrigerator do not take it to regular municipal waste containers. Instead, take it to an electrical/electronic waste recycling and re-use centre. This refrigerator contains insulation gases and refrigerant and must be disposed of in the appropriate manner.
Troubleshooting PROBLEM REASON SOLUTION 1. Make sure the plug is properly inserted into the socket A gap in the electric system 2. Make sure the socket is not faulty The appliance does circuit 3. Make sure the power supply cord is not not work damaged The compressor hardly ever...
Need help?
Do you have a question about the WSR288 and is the answer not in the manual?
Questions and answers