Table of Contents
Advertisement
4. Service Modes
4.1 Service Modes
The Service Mode feature is split into following parts:
Factory Mode.
Factory mode offer features, which can be used by the Service engineer to repair/align a TV set. Some features are:
Make alignments (e.g. White Tone).
Display information.
Note: For the new model range, a new remote control (RC) is used with some renamed buttons. This has an impact on the activation of the
Service modes. For instance the old "MENU" button is now called "HOME" (or is indicated by a "house" icon).
4.2 Factory mode:
Purpose
To perform extended alignments.
How to Activate the Factory mode
To activate the Factory mode, use the following method:
Press the following key sequence on the remote control transmitter: from the "menu/home" press "1999", directly followed by the
"Back/Return" button. Do not allow the display to time out between entries while keying the sequence.
After entering the Factory mode, we can see many items displayed, use the UP/DOWN keys to display the next/previous menu items
Factory mode overview
How to Exit the Factory mode
Select EXIT from the menu and press the "OK" button.
Note: When the TV is switched "off" by a power interrupt, or normal switch to "stand-by" while in the factory mode, the TV will show up in "normal
operation mode" as soon as the power is supplied again.
Advertisement
Table of Contents
