Table of Contents
Advertisement
Connecting to a TV Using a Digital Optical Cable
Check the OPTICAL IN port of
the Soundbar main unit.
OPTICAL IN
Bottom of Soundbar
1. Connect the OPTICAL IN (Audio) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital
optical cable.
2. Press the
button on the top panel of the Soundbar or the SOURCE button on the remote control to
select the D.IN mode.
c If TV sound is not output, press the
remote control to select the D.IN mode on Soundbar main unit display.
c If the Soundbar main unit display does not change to D.IN, disconnect the HDMI cable.
c Press the button on the remote control for 5 seconds to turn Auto Power Link on or off.
(Auto Power Link is set to ON by default.)
Optical Cable
OPTICAL OUT
Check the OPTICAL OUT
port of your TV.
D.IN
button on the top of your Soundbar or the SOURCE button on the
· 6 · English
Soundbar
Advertisement
Table of Contents
