Adjusting The Drive Belts - Brave BRSG105K Owner's Manual

SAFETY & OPERATION
POWER LOSS AT CUTTER WHEEL
• Check your belt tension - slipping belts cause power loss
• Worn belts - replace
• Belt tension should be set at .25 inch movement above and below normal belt position
• Check your four engine mounting bolts, loose engine bolts will create loose belt tension
REMOVE FOUR COVER BOLTS
AND REMOVE BELT COVER.
LOOSEN 4 ENGINE BOLTS
ADJUST BOLTS EVENLY TO MOVE
THE ENGINE TO CHANGE BELT
NOTE: Use Brave OEM replacement belts for top performance.

ADJUSTING THE DRIVE BELTS

BRSG105K REV A | 13