Basic Operating Instructions; Select The Desired Program; Select The Desired Sound; Mute - Haier HL26R-A Owner's Manual

Basic Operating Instructions

Select the desired program

1.Using CH+/- buttons
Press CH+ button on the remote control to select a
channel number increasing direction.
Press CH- button on the remote control to select a
channel number decreasing direction.
2.You can use the number buttons and button on the
remote control to directly select TV channels and
press OK to confirm.
Note
If skip is On on one channel, press CH+/- button, the
channel will not appear.

Select the desired sound

1.Press VOL+ button to increase the volume. A number
will appear on screen indicating the volume level.
2.Press VOL- button to decrease the volume. A number
will appear on screen indicating the volume level.
When the volume button are pressed the volume level is
Displayed automatically on the TV screen.

Mute

When you need to pay attention o a conversation, or
there is a telephone calling you or there are some
guests visiting you, the sound elimination(mute)
Function is very convenient.
1.Press MUTE button to mute the sound temporarily. A
mute icon appears on the screen. At this time, the
sound of the TV set is turned off.
2.Press MUTE or VOL+ button again to restore the
sound.
To add or delete your favorite
channels to the favorite channels
list
1.Press CH+/- buttons to select a channel.
2. Press ADD/ERASE button to add the channel to your
favorite channels list.
3.Press ADD/ERASE button again to delete the channel.
To tune to a favorite channel:
1.Press FAV.LIST to open your favorite channels list.
2.Press / button to select a channel on the list.
3.Press OK button. Your TV tunes to that channel.
18 TV LCD-TFT

SAP Broadcasts Setup

This TV can receive MTS stereo programs and SAP
(Secondary Audio Program) that accompanies the
stereo program; if the station transmits an additional
sound signal as well as the original one.
When having selected SAP button on the remote
control, this TV can only receive the signal when the
TV station transmits the proper signals.
Mono sound is automatically received if the
broadcast is only in Mono; even though Stereo or
SAP has been selected.
Select Mono if you want to listen to mono sound
during stereo/SAP broadcasting.
Stereo or SAP can be received in a Analog channel.
To listen to SAP
1. P ress SAP to select your desired mode in a analog
signal. Each time you press SAP, Mono,
Stereo or SAP appear. If other languages are
available on the digital signal, select them with the
SAP button.
2. Press EXIT to save and return to TV viewing.
Operation