Safety and Precautions...2 Installation...3 Aerial connection...3 Preparation of the remote control...3 Function buttons and external sockets...4 Front panel of the TV set...4 Rear panel of the TV set...4 Using the remote control...5 Basic operation Switching the TV set on/off...6 Watching TV ...7 Watching TV program...7...
6. Do not subject the TV set to rain, or use it in a damp environment. When cleaning dust, be sure to remove the power supply plug from its socket first. Do not clean the housing directly with liquid detergent, use a damp cloth.
Installation 1.First read carefully the relevant instructions in Safety and precautions . 2.Place the TV set in a room where there is no direct sunlight on it. Any light reflecting from the screen will cause fatigue of your eyes. 3.Use gentle indirect lighting for comfortable watching. The best distance of watching is 5~7 times the screen height.
Function Buttons and External Sockets Front panel the TV set PROGRAM Program Rear panel of the TV set Video output terminal Video input terminal Antenna/ CATV input socket Audio left channel output terminal Audio left channel input terminal COAXIAL Coaxial terminal...
ZOOM D.CALL CAPTION Buttons on the remote control Stand By DVD Open/close Scan Former Program Mute Call Screen Display Program Number TV/AV Exchange Digital Selector H.LOCK TV/DVD Volume/Channel Selection MENU Exit Screen Display Picture Mode Calendar (Not available) P.STD Time...
Note 1 To turn the set off to Standby button on the remote control. AUTO 2 To turn off the TV fully, press the Power button and release. Auto switch-off function Should the signal input from the aerial be interrupted for more than 5 minutes, the TV will automatically switch to Standby .
Watching TV Watching TV programs TV set to adjust the volume level. The range is 0~100. When MENU MENU How to select a TV programme Select the desired program 1 Using number buttons Directly enter the channel number with the numeric keypad on the remote control.
Auto program scan 1 Press the SCAN button to scan through all the memorised TV programs. The scan will pause for about 2 seconds on each channel. 2 If you want to stop the function during auto tunning, simply press the SCAN button again.
Searching channels This TV set has three methods to set the channels, which are respectively full automatic, semi automatic and manual fine tune. In this section, how to use the remote control to set the channel is explained. You can also use the buttons on the TV to set the channel.
Searching channels Continued Semi-automatic search MENU MENU To turn off the on-screen menu In general, after you press the MENU button, the menu display (PIC, SOU, within 30 seconds. If you want to eliminate these contents EXIT immediately, please press the EXIT button. Semi-automatic search 1 Press the P+/- buttons or the PROGRAMME NUMBER (0-9) to...
Searching channels Continued Manual fine tune 1 Press the P+/- buttons or PROGRAM NUMBER 0-9 button to choose the desired channel (e.g. channel 1). MENU MENU 4 Use the V-/+ buttons to manually fine tune the station until the best picture and sound are obtained.
Searching channels Continued Program skip MENU MENU MENU Program skip Channels can be set so that they are skipped during program selection. 1 Press the P+/- buttons or PROGRAM NUMBER 0-9 button to choose the desired channel (e.g. channel 1). Press the MENU button.
V-/+ buttons to obtain the desired effect. MENU Note:The "Hue" item only appears when the colour system is NTSC. "STANDARD"," RICH", "USER","LISTEN", the TV screen when listening to music only channels; lighting; as daytime sport; tastes. I T E M...
Convenient picture and sound control functions Continued Black Stretch Automatically increases the contrast range Noise Reduce Picture Noise & Grain Reduction Circuit. (Use only on poor reception) Black stretch and noise reduce How to select BLACK STRETCH Press the MENU button. The MAIN MENU will appear with the PIC (picture) icon flashing.Press the MENU button a further 2...
2 Press MUTE again to turn the sound back on. Fade When FADE is turned on, the TV will protect the tube by fading the picture in when the TV is switched on, and fading the picture out when the TV is switched off.
Clock setting and timer on/off functions Clock setting The clock will only work if the TV set if left turned on or in standby. When the set is disconnected from the power supply or is turned off by the main power on the front panel, the clock loses power and will need to be reset when the power is reconnected.
Time functions Continued Sleep timer and program preset Sleep timer The sleep timer switches the set to stand-by after the sleep time has elapsed. Sleep time can be set in 10 minute intervals up to TIME 180 minutes, as shown in the illustration.
Set up function Screen saver and Calendar How to start screen saver function When the background function is ON a bouncing 'NO SIGNAL' will be displayed on a blue back ground. with the PIC (picture) icon flashing. Press the MENU button a further 2 times until the FUN (function) icon is flashing.Press P- to enter the FUNCTION menu.
Set up function Continued AVL function Automatic Volume Level control reduces the effect of large volume changes. For instance, when advertisements come on. The MAIN MENU will MENU appear with the PIC (picture) icon flashing. Press the MENU button a further 2 times until the FUN (function) icon is flashing.Press P- to enter the FUNCTION menu.
MENU MENU ORGANISE This feature enables TV programmes that may be on a wrong program number to be moved to another number. This feature is very useful when Automatic Search Tuning has been used because programmes are stored in the order they are found, which is usually not the desired order.
Setting the Lock This TV set provides the option of locking various parts of the TV to guard against unauthorised viewing. Changing your password H.LOCK 2 Press the 0 button four times, and enter the menu of LOCK setting. Press P+/- button...
Page 23
3.When AV LOCK is set ON screen will 4.When the CHILD LOCK is set ON, if the buttons on the TV are pressed, the screen will indicate that the TV set is in the status of CHILD LOCK, and the buttons won't work.
Basic Playback Basic Playback Preparations Press the DVD/TV button on the remote control or the TV to turn on the DVD player. Basic playback 1. Press OPEN/CLOSE to open the disc tray, place a disc on the disc tray. There are two different disc sizes. Place the disc in the correct guide on the disc tray.
Advanced Playback Advanced Playback IMPORTANT NOTE: ALL DESCRIBED FUNCTIONS ARE FOR DVD DISCS. IF YOU PLAY OTHER FORMATS, THE OPERATION AND DISPLAY ON SCREEN MAY VARY. CAPTION Press " CAPTION ", the screen will display "SUBTI- TLE 01/XX XXXXX", "01" indicates the ordinal number of this language;...
Special Function Playback JPEG DISC PLAYBACK Users can record pictures from digital camera or scanner onto a CD-R or CD-RW disc using a personal computer, CD recording drive and suitable software. Be sure to use good quality recordable discs and trustworthy software with good instructions. Take care with recording settings: the disc must be recorded as data disc ISO9660 format, short file names (8 characters) are best, no multi-session and must be "finalised".
16 9 You may select this if you have a widescreen (16:9) TV . Back bars may still appear above and below the picture even if using a widescreen TV. This is because some film directors prefer to use ultra widescreen aspect ratios e.g.
Page 28
SCREEN SAVER: If the screen saver is on,then there will be an animated picture of DVD on the screen whenever the DVD player is idle for more than 3 minutes . ..General Setup Page.. TV Display Angle Mark OSD Lang Spdif Output Captions Screen Saver Off ..General Setup Page..
Page 29
The Preference Page is only available when there is no disc in the player. These settings are applied consistently to all discs which are inserted and played. TV TYPE: This player supports different TV output, including MULTI(Auto), NTSC, and PAL systems.
Playable Discs The following discs can be played: You cannot play discs other than those listed above. You cannot play non-standard discs, even if they may be labelled as above. The performance of CD-R or CD-RW discs depends on the way the disc is prepared - see under "Special function playback - JPEG disc playback".
Disc Protection and DVD Characteristics Compare DVD disc with other discs: Encode Digital/MPEG method Single- Double side -side Capacity single- single -layer layer 4.7G 8.5G Playing Time minutes minutes 12cm/8cm Disc diameter Horizontal More than 500 line resolution Picture proportion Subtitle Language 8 kinds...
There is also an AV input on the side of your television. Use the Left Audio input (white terminal on the TV), if you are connecting equipment with mono sound. The MONO sound will be delivered by both left and right speakers.
The TV set must only be repaired by a qualified registered service person. Never attempt to remove the back cover as the TV set has dangerous voltages in side that may cause a fatally or fire. 2. The cabinet may produce the occasional "snapping sound" This is normal and caused by the materials in the cabinet expanding with room temperature changes.
2X2W 10% THD Power requirements AC 240V~ 50Hz Power consumption 356 Width x370 Depth x367 Height Dimension Remote control Owner's manual Accessories Battery(AAA) Due to our policy of continuous improvement of products design and specifications may change without notice. 3415DVD...