MAC TOOLS AS726M Operating Instructions

Operating Instructions • Warning Information • Parts Break d own
WARNING
Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement
and other masonry products, and
• Arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to
filter out microscopic particles.
SPECIFICATIONS
Strokes Per Minute (SPM) . . . . . .7,500
Stroke Length . . . . . . . . . . . . . . .3/16"
Cutting Capacity . . . . . . . . 3/64" Steel
Air Inlet (NPT) . . . . . . . . . . . . . . . .1/4"
Air Pressure (PSIG) . . . . . . . . . . . . . . 90
Air Consumption (CfM) . . . . . . . . 0 .7
AS726M
Hose Size (I .D .) . . . . . . . . . . . . . 5/16"
Sound Pressure Level . . . . . . . 84 dBA
Sound Power Level . . . . . . . . . 87 dBA
Length . . . . . . . . . . . . . . . . . . . 7-5/8"
Net Weight . . . . . . . . . . . . . . . 0 .94 lbs .
1
WARNING
• MAxIMuM sPM Of 7,500
• MAx AIr Pressure:
90 PsIg, 6.2 BAr
• rPM Of the ACCessOry
Must exCeed tOOL rPM
ALWAys reAd
InstruCtIOns
BefOre usIng
POWer tOOLs
ALWAys WeAr
sAfety gOggLes
ALWAys WeAr
heArIng
PrOteCtIOn
AvOId
PrOLOnged
exPOsure tO
vIBrAtIOn
Copyright © Professional Tool Products, 2015
All rights reserved
AS726M
MINI
AIR SAW
11/13/14