The Menu On The Screen (Osd) With The Remote Controller - Omron SENTECH STC-HD133 Series User Manual

3.2.3. The menu on the screen (OSD) with the remote controller

A. Page 1
PAGE 1 2 3 4 5 6
ALC
GAIN
SHUTTER
GAMMA
OFFSET
CONTRAST
SHARPNESS
MIRROR
1) ALC
Selects enable or disable for the auto light compensation. (Default: ON)
a) ON
Enables the auto light compensation.
It is necessary to select "AUTO" for SHUTTER and GAIN then set the target brightness level.
b) OFF
Disables the auto light compensation.
It is necessary to set the exposure time for SHUTTER and gain for GAIN.
2) GAIN
Selects the gain control mode from below two modes. (Default: AUTO 65)
a) AUTO
The AGC (Auto gain control) mode
It is necessary to set the target brightness level. This target brightness level is common for the auto
shutter.
b) FIXED
The fixed gain control mode.
It is necessary to set the fix gain from 0 (0dB) to 511 (18.345dB).
3) SHUTTER
Selects the shutter control mode from below two modes. (Default: AUTO 65)
a) AUTO
The auto shutter control mode.
It is necessary to set the target brightness level. This target brightness level is common for the auto
shutter.
b) FIXED
The fixed shutter control mode.
It is necessary to set the fix shutter from 0 (1/60s) to 690 (1/100,000s).
STC-HD133 Series (STC-HD133DV / STC-HD133SDI) /
STC-HD93 Series (STC-HD93DV / STC-HD93SDI) Users guide
ON
AUTO 065
AUTO 065
PRESET
000
128
H04 V06 CORING03
OFF
No.16S058-01
9/49