Faber FVC X-CYCLONE 151 Instruction Manual page 8

GENERAL USAGE AND SAFETY GUIDELINES
2. FILTER CLEANING
Take over the lter and metal
lter dust cup.
Put the lters to dust collector
after cleaning. Rotate dust collector
and align " " with " ", then
x it in place.
3. CLEAN THE ROLLING BRUSHES
- Make sure the power is o , do not use sharp tools when cleaning the rolling brush to avoid damage
Press the rolling brush release
button and open it up
Indeed, clean with water and a
mild detergent.
Take out the rolling brush.
Air dry the cutton lter and metal
lter until completely dry before
placing back in the vacuum cleaner.
Remove the cords and hairds
on it.
Putting the brush back and
x it in position.